Answering Machine User Manual

!
Storing Memory (Speed) Dial
numbers
To program a speed dial location, do
the following:
With the phone OFF, enter the
telephone number you wish to
store (20 Digits Maximum). -.~.
~rogram mode by pressing
lPROGJ. The display will show the
following:
"
Quick Memory Dialing :1
The MEM11 MEM2 keys.giveyou one
button access to the MEMORY DIAL
number stored in memory location 01
I 02 respectively. This "may be a
frequently dialed friend. business. or
emergency number.
Enter the memory location (01..20)
you wish to store the number in.
As soon as the second memory
location digit is entered, the unit
will emit a warbled tone (a short
series of beeps) to confirm
successful programming and exit
program mode.
-rJft-
~
There are two ways to dial using
the MEM1 I MEM2 KEY
.Press PHONE .
.Press MEM1 I MEM2 .
.The phone number' stored in
memory location 01 I 02 will be
automatically dialed.
OR
.With the Handset OFF I press
MEM1IMEM2.
.The phone number stored in
memory location 01 .1 02 will be
automatically dialed after a 2
second delay.
Quick Ref:
MEM1 ~ Memory location 01
MEM2 ~ Memory location 02
25
-I
-..~
I I
! I
rF
OT9410"Z.p65
25
6/24/98. 12:20 PM
-@r-
Unsuccessful programming can result
from not correctly completing the
programming sequence. If this
message appears, simply repeat the
programming sequence.