Answering Machine User Manual

Clear/Delete (CLR/DEL) i<~y!. c
-.
The CLEAR and DELETE functions
can be accessed separately depending
on how long the key is held down. For
example, to clear the last di~!t entere~
on the display, press thelCLR/OELJ
key for less than 1 second. Press and
hold the (CLR/DEL) key for more than
1 second to completely clear the
display.
Turning Off The Ringer
To turn off the ringer do the following:
The delete function is also used to
delete Caller ID (CID) records, memory
dial records, and Message Waiting
indication. See DELETIN.G STORED
NUMBERS, DELETING NUMBERS
and MESSAGE WAITING.
Checking The Ringer Type
To test the present ringer type, do the
following:
Advanced Dialing i ':'~c
There are two different ways to dial a
number:
1. Press the~key and wait for
a dial tone. Then dial the number
you want either manually, using
MEMORY (MEM) dialing, Caller
ID (CJD) dialing or REDIAL.
+
I
-@-
I
2. Enter the number you wish to dial
on ~Iay first. Then press
th~ TALK) key. This will dial the
number which is displayed after 2-
seconds.
Press ~ or @f) to exit.
.Press and hold (CLR/DEL) until
Or
.Press (Qff) and start over.
24
rF
~
,
~-,
24
6124198. 12:20 PM
-@-
I
DT94102.p6S
the display is cleared, then dial
normally.