Answering Machine User Manual

Set-Up
.Plug AC adapter into a standard
electrical outlet and Base Unit.
"
To MUTE A Call I:
Press ~ to disable the
handset microphone.
Set TONE'PULSE switch to PULSE
or TONE. The unit is factory set to
TONE.
Press ~ again to return to
normal two way conversation.
TO PAGE The Handset " ,~
.~ge from the base. press
~.
t,.
Let the handset battery pack ch.arge
for 16 hours before first use.
Connect telephone line cord to
base unit and telephone jack.
.To cancel the page either press
~ again on the base or press
~ on the handset.
Making Calls
" Press the ClliR) key. When
"PHONE ON" is displayed and
you hear a dial tone, dial the
number.
.Enter the number youOwish to store
on the display, up to a maximum of
20 digits.
.Or
Enter the number to be dialed on
the display and then press the
@R) key.
~
-@-
I
Answering Calls .
.To answer,a call.~any key
other than @if) ,l~) , or the
Volume Keys. The handset will
NOT auto-answer when lifted off
the base cradle.
Hanging ~
.Press lQ.E.EJ or place the handset
in the cradle to hang up a call.
.Press ~ .The handset will
display "PROGRAM LOCATION
"
To Place A Call On HOLD
.Press (EQbQ) on the handset to
~n active call on hold. Press
~ again to return to the call.
Enter a two digit memory location
(01 ..20). The unit will store the
number, emit a happy tone to
confirm successful programming
and exit program mode.
19
-,
-1!
i I
rF
OT94102.p65
19
-~
6/24/98. 12:20 PM