CERTIFIED USB WIDE SCREEN DS9343TPK Portable DVD Player Owner’s Manual SDIMS MMC CARD
WARNINGS AND CAUTIONS Notice This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
WARNINGS AND CAUTIONS Placement ! To prevent fire or electric shock, do not expose this appliance to rain or moisture. ! Do not place the set on an unstable cart, stand, tripod, bracket or table to prevent it from falling. ! Keep the unit away from strong magnets, heat sources, direct sunlight, or excessive dust. ! If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit.
WARNINGS AND CAUTIONS Headphones ! Excessive sound pressure from headphones can cause hearing loss. ! Connect earphones or headphones to the headphone jack with the volume set low and increase it if required. When earphones or headphones are connected, no sound will be emitted from the connected speaker system. Disc ! Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. ! Do not stick paper, tape or glue on the disc.
CONTENTS Warnings and Cautions..................................................................2 Contents.......................................................................................5 Introduction...................................... ............................................6 Vehicle Installation........................................................................7 Charging the Battery .....................................................................8 Controls and Indicators...........
INTRODUCTION Thank you for selecting the DS9343TPK Portable DVD Player. The main features include a 9" Swivel Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD Player. The unit incorporates the latest state-of-the-art electronics and is designed for use in hotels, offices, homes or vehicles. The unit is constructed to provide years of reliable, trouble-free service, is compact so that you can take it with you anywhere, and is designed for quick and easy installation.
VEHICLE INSTALLATION INSTALLING THE DVD PLAYER ON A SEAT BACK IN A CAR 1. Unfold the carry bag, and place the DVD Player on the bag beneath the elastic straps. Ensure that the unit's corners are secured by the elastic straps. Ensure that the center strap is across the face of the DVD Player. 2. Secure the upper portion of the carry bag to headrest support bars using the headrest strap. Adjust the headrest strap until the bag is firmly secured. 3.
CHARGING THE BATTERY The player is powered by a lithium-polymer battery. It has no memory effect and thus it can be recharged at any time regardless of whether it is fully or partially discharged. The unit can be recharged when it is powered on or off. When the power is off, it takes about 3～4 hours to fully charge the battery. When the power is on, it takes approximately ten hours to charge the battery. When fully charged, the battery can be used for about four hours.
CONTROL AND INDICATORS 1. SPEAKER OUTPUT 2. DISPLAY SCREEN 3. RED LED CHARGE INDICATOR Flashes when the battery is charging. Steadily lit when the battery is charged. 4. INFRARED REMOTE SENSOR 5. GREEN LED ON/OFF INDICATOR Steadily lit when the unit is on. 1 1 2 6. PLAY/PAUSE ( ) BUTTON Press once to pause playback, then press again to continue playback. 3 4 5 7. STOP ( ) BUTTON Press to stop playback. 8. VOL- BUTTON Press to decrease the volume. 9 . VOL+ B UTTON Press to increase the volume. 10.
CONTROL AND INDICATORS 1. USB SLOT Side View 2. MMC/SD/MS CARD SLOT PHONE 1 3 2 AV OUT 1819 4 3. 3.5mm HEADPHONE JACK Note: When headphones are connected, no sound will be emitted from the speakers. OFF/ON 4. AV OUT JACK 5 6 5. ON/OFF SWITCH Slide the switch to ON position to turn on the unit . Slide the switch to OFF position to switch off the unit. 6. DC IN 9-12V JACK 9″Swivel LCD Screen The LCD screen is connected to the main body of the player via a rotatable hinge.
REMOTE CONTROL OPERATION BATTERY INSTALLATION Remove the battery compartment cover according to the diagram on the right. 1: Press the ridged area to the left. 2: At the same time, pull the battery tray out. 3: Place a CR2025 lithium battery on the tray with the positive side facing upward. 4: Replace the cover. Note: Do not expose the battery to excessive heat. Remote Control REMOTE CONTROL FUNCTIONS 1 2 3 4 5 6 7 FUNCTION 1. ANGLE Press to switch the viewing angles.
REMOTE CONTROL OPERATION FUNCTION 12 13 14 8 9 10 11 8. SUBTITLE Press repeatedly to switch/show the subtitle(s) or turn off the subtitle function. Note: This function only works with discs encoded with subtitles. 9. PLAY ( ) Press to start a playback or resume normal playback from fast forward, fast reverse, slow-motion, frame-by-frame playback, etc. 10. DIGIT KEYS The digit keys can be used to input numbers or make selection of a track, a chapter, etc. 11.
REMOTE CONTROL OPERATION FUNCTION 12 13 14 15 16 17 18 19 15. A-B REPEAT Press to repeat a specific section of a disc. Press this button to mark down the starting point (A) and press it again to mark down the ending point (B). The unit will play back this section over and over again. Press this button a third time to cancel A-B repeat and resume normal playback. Note: Points A and B must be in the same title/ track. 16. MENU Press to return to the root menu when playing a DVD.
REMOTE CONTROL OPERATION 20. NEXT ( )/DOWN Press to skip to the next chapter/track. Press to navigate in a down direction when menu is displayed on the screen. FUNCTION 21. STOP ( ) Press once to pause a playback, then press Play ( ) to continue playback. Press twice to stop playback. 20 21 22 23 24 25 26 22. PAUSE ( ) Press to temporarily pause playback; press it again or press Play ( ) to resume playback. 23. ZOOM Press to zoom in/out of a scene.
CONNECTING TO A TV This player has an AV OUT jack. You can connect it to a TV for viewing. Use an AV cable (not supplied) to connect the AV OUT jack to the video input terminal, L/R channel audio input terminals of a TV. After the connection has been correctly made, turn on the connected TV and set it to AV mode. You can then view the video with the connected TV.
SYSTEM SETUP The System Setup menu allows you to personalize the DVD Player settings to your preference. Once the initial settings are set, they are retained in the DVD player until modified. MENU OPERATION 1. Press the SETUP button on the remote control or on the unit to show the Setup Menu. 2. Press the LEFT ( ) or RIGHT ( ) button to select the GENERAL, AUDIO, DOLBY, VIDEO or PREFERENCE setup page. The submenu of the selected page appears. 3.
SYSTEM SETUP ANGLE MARK This function is available when a disc is encoded with multiple camera angles. Options: ON: Enables the Angle Mark function. When a disc with multiple camera angles is playing, an angle mark will display on the screen. You can then view the video of different camera angles by pressing the ANGLE button on the remote control. OFF: Set this item to OFF to hide the angle mark.
SYSTEM SETUP AUDIO SETUP PAGE There is one item in the AUDIO SETUP PAGE - ANALOG AUDIO. GENERAL AUDIO DOLBY VIDEO -- AUDIO SETUP PAGE -- ANALOG AUDIO GOTO AUDIO SETUP PAGE ANALOG AUDIO DOWNMIX This function only applies to Dolby AC-3 encoded 5.1-channel discs. Options: The 5.1-channel audio is mixed into the left channel and right channel . LT/RT: STEREO: The 5.1-channel audio is mixed into a stereo signal.
SYSTEM SETUP DOLBY DIGITAL SETUP There are two items in the DOLBY DIGITAL SETUP PAGE. They are DUAL MONO and DYMAMIC. GENERAL AUDIO DOLBY VIDEO PREFERENCES -- DOLBY DIGITAL SETUP -- DUAL MONO DYNAMIC GOTO DOLBY DIGITAL SETUP DUAL MONO Note: This function only applies to the Dolby AC -3 encoded 2-channel discs. Options: STEREO: The player outputs the left-channel audio and right-channel audio via the left and right speaker respectively.
SYSTEM SETUP VIDEO SETUP PAGE There are two items in the VIDEO SETUP PAGE. They are COLOR SETTING and PANEL QUALITY. GENERAL AUDIO DOLBY VIDEO PREFERENCES -- VIDEO SETUP PAGE -- COLOR SETTING PANEL QUALITY GOTO VIDEO SETUP PAGE COLOR SETTING The COLOR SETTING menu is used to set up the picture quality of the connected TV set . Options: SHARPNESS: Adjusts the edge enhancement of the picture. There are three options: HIGH, MEDIUM, and LOW. BRIGHTNESS: Adjusts the black level in the picture.
SYSTEM SETUP PREFERENCE PAGE This item is available if there is no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped. There are eight items in the PREFERENCE PAGE. They are TV TYPE, PBC, AUDIO, SUBTITLE, DISC MENU, PARENTAL, PASSWORD, and DEFAULT.
SYSTEM SETUP AUDIO MENU This item allows a user to select a preferred audio language. This function only applies to discs encoded with different audio languages. Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai. You can also change the audio language by pressing AUDIO on the remote control. Note: If the selected language is not available for the currently playing disc, the disc's default setting is applied.
SYSTEM SETUP PASSWORD This item allows a user to access the Password Setup Page. Password Setup Page Options: PASSWORD MODE: You can activate or disable the password function by setting it to ON or OFF. You must key in the correct password and press ENTER to confirm before you can change the option The default password is 3308. PASSWORD: Access this item to reset the password. To change the password: 1. Enter the old password in the OLD PASSWORD row. 2. Enter the new password in the NEW PASSWORD row. 3.
PLAYBACK DVD BASICS To get the optimum use out of the DVD Player, make sure you read this section completely. DVD REGION CODE The DVD player is preset to a region code at the factory depending on where the DVD player is sold. A DVD from a different region cannot be played in this unit and the unit will display "WRONG REGION”. Region 1 - USA, Canada Region 2 - Japan, Europe, South Africa, Middle East, Greenland Region 3 - S.
PLAYBACK TYPES OF DISCS YOUR DVD PLAYER WILL PLAY Your system will play the following types of discs: • DVD* disc - DVD discs which contain video. • VCD disc - VCD discs which contain video. • Audio disc - Audio CDs contain musical or sound content only. • MP3 disc - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). *Note: This system is capable of playing most recordable DVD formats.
PLAYBACK MP3 DISC PLAYBACK MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed. To Play an MP3 Disc: 1. Slide the power switch to the ON position. 2. Insert an MP3 disc into the player.
PLAYBACK KODAK PICTURE CD OR JPEG IMAGE CD PLAYBACK 1. Place a Kodak Picture CD or JPEG image CD in the disc tray. The unit will load the disc automatically. 2. Press STOP ( ) to enter the thumbnail mode to preview the pictures. 3. In the thumbnail mode, press the direction keys to select a picture, then press the ENTER, OK or PLAY ( ) buttons to start the playback from the selected picture. 4.
SPECIFICATIONS Compatible DISC DVD/VCD/CD/MP3 Signal system PAL/NTSC Panel size 9 inch Frequency response 20Hz to 20KHz Video output 1 Vp-p 75 Ohm unbalanced Audio output 1.2 V ( Dynamic range ≥85dB Laser Semiconductor laser, Wave length: 650 nm/795nm Power source DC 9-12V Power consumption 10W Operating temperature 0~35 C Battery Type Li Polymer 0.
TROUBLESHOOTING If your DVD player does not seem to be functioning properly, check the items below before contacting Audiovox Technical Support. Symptom No Power Remedy Cause(s) ●The adapter is not connected to the unit securely or is not connected to the power ●The unit is turned off. Picture ●The TV is not connected to this unit There is no securely with the AV cable. picture displayed on the connected TV. Sound There is no sound. ●The volume is set to the lowest level. ●The sound is switched off.
OWNER’S NOTES -30-
-31-
© 2011 Audiovox Electronics Corp., 150 Marcus Blvd.
