OWNER’S MANUAL DPF701 Digital Photo Frame
Important safety instructions 1. All the safety and operation instructions should be read before the product is operated. 2. Do not place this product in direct sunlight or near a heat source. Excessive heat may cause the Digital Photo Frame to malfunction, or change color. 3. Do not use this product near water (e.g., near a swimming pool ). 4. If you are unable to insert the plug fully into the power outlet, try reversing the direction of the plug.
Package Contents QTY Item Image 1 Digital Picture Frame 1 Remote Control 1 AC/DC Power Adaptor (+9V, 1A, Support 110/240VAC 50 -60Hz) 1 User Manual Getting Started 1. Connect the AC power adapter into the digital photo frame and plug it into a power outlet. 2. Insert your memory card with photos or music, into the memory slot (MultiMediaCardTM/ Secure DigitalTM/ Compact FlashTM/xD Memory CardTM/ Memory StickTM) or USB storage device into the USB port.
Photo Frame Controls and Indicators Functions Top View POWER LED POWER button PLAY/PAUSE/SELECT button MENU button UP/COPY/DELETE button DOWN/ROTATE button PREV.
Remote Control Functions Pull plastic tab from remote control to activate. (Note: replacement battery model #CR2025) CLOCK: Press to cycle through clock calendar and side show. NOTE: Only available when in slide show mode. SOURCE: Press to select which external memory card or USB storage device, which will be used to retrieve data for the DPF. NOTE: Internal memory can only be accessed by removing all external memory sources! REPEAT: Press to switch between different repeat modes for audio playback.
Changing Settings Press the MENU button and use the arrow keys to highlight the “SETTING” icon. Press the SELECT button to gain access to the GENERAL SETUP PAGE. Once at the GENERAL SETUP PAGE press Select to enter the the adjustment mode. General Setup Page Press the MENU button and use the arrow keys to highlight the “SETTING” icon. Press the SELECT button to gain access to the GENERAL SETUP PAGE. Once at the GENERAL SETUP PAGE press SELECT to enter the adjustment mode.
SLIDESHOW TIME: Allows the user to select how long an image is displayed in slide show mode. Use the arrow keys to position the highlight over SLIDESHOW TIME. Press SELECT to enter the selection mode. Upon finding the desired setting, press SELECT to exit and save your selection. OSD LANGUAGE: Allows the user to select what the OSD LANGUAGE will be. Use the arrow keys to position the highlight over OSD LANGUAGE. Press SELECT to enter the selection mode.
PHOTO MODE: Select normal mode to display the photo in its native format or widescreen mode to fit photos to the full width of the screen. Option is only available for use with external memory devices. Note: In widescreen mode, a portion of the photo may be cropped. Use the arrow keys to position the highlight over PHOTOMODE. Press SELECT to enter the selection mode. Upon finding the desired setting, press SELECT to exit and save your selection.
DEFAULT: Use the arrow keys to position the highlight over DEFAULT and press SELECT twice to restore factory defaults. Clock Setup Page Press the MENU button and use the arrow keys to highlight the “SETTING” icon. Follow by pressing the SELECT button to bring up the GENERAL SETUP PAGE. Then press the right arrow key to highlight the clock icon and press select to enter the adjustment mode. Clock Mode: Clock mode allows the operator to select whether the time will be displayed in 12 or 24 hour mode.
AUTO POWER ON/OFF: Set desired time for digital photo frame to automatically power on or off. To disable this function, return to “AUTO POWER ON”, then use the UP or DOWN arrow keys to select ”-:-:-” . Repeat above steps to disable the “AUTO POWER OFF” function. When the unit turns on it will be at the Menu screen. ALARM SETTING: Use the arrow keys to set the Alarm Mode “ON”. Then highlight ALARM SETTING and enter desired alarm turn on time. Note: The photo frame must be powered “ON” for the alarm to work.
DATE SETTING: Use the arrow keys to highlight DATE SETTING then press select to enter the adjustment mode. Use the Up/Down arrow keys to set the date. Use the Left/ Right arrow keys to select which parameter you will adjust. Once complete press the SELECT key to exit and save your selection. Viewing photos Press MENU and use the arrow keys to highlight “PHOTO” on the main menu. Press SELECT for the slideshow to begin.
ROTATE PHOTO: Rotates the photo 90 degrees to the right each time the Down arrow is pressed. COPY PHOTO INTO INTERNAL MEMORY: Press the Up Arrow in Pause mode and follow the on-screen instructions. Note: Function only available for copying a photo into the internal memory, not for AUDIO. DELETE PHOTOS FROM INTERNAL MEMORY: Press the Up Arrow and follow the on-screen instructions. Note: Function only available for deleting photos from the internal memory.
MUSIC PLAYBACK Press MENU to access the Menu Screen, use the arrow keys to highlight the AUDIO icon. Then press SELECT. The display will list music or audio files that reside on the external memory source as illustrated below: Use arrow keys to select the desired audio file and press SELECT to start playback. Use the “volume” control on the left side to adjust volume. Press REPEAT at any time to change repeat mode.
Specifications Size Aspect ratio 7” 16:9 Resolution External Power Adapter 480*234 Pixels +9v, 1A,Support 110/240Vac Audio Internal speakers Stereo USB Ports Storage/Media STD USB 2.
Troubleshooting Solution Problem Your digital picture frame won’t turn on A memory card is inserted in your digital picture frame but you cannot view your photos. The adapter is not securely connected to your picture frame or the power switch is not on. * Make sure that the memory card contains JPEG files. (Progressive JPEG are not supported). * Turn your digital picture frame off and make sure that the memory card is inserted all the way into the card slot and is inserted correctly.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
