Installation manual

17
7) Image Mirror/Normal setting.
If your image on your monitor is reverse and you need to flip the image
press the "+" or "-" button to toggle through the choice. Press "ENTER"
when finished.
8) Camera Angle Setting
After you have installed the camera and adjust its angle and secured the
mounting bolts, the camera angle setting allows for fine tuning of the
viewing angle without having to physically change the camera angle.
The goal is to adjust the view so that a small portion of the bumper is
visible on screen (see image “B” below).
Use the "+" or "-" button to adjust this setting. Press once and wait to see
the change. When you have achieved the correct angle press the
"ENTER" button to finish.
A. B.