D8000IP 8" LCD MONITOR AND PORTABLE DVD WITH DOCK FOR IPOD PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
Content A. Introduction ............................................................................4 B. Cautions and Warnings ........................................................4 C. Contents ...............................................................................6 D. Powering and Installation .......................................................6 E. Controls, Indicators, and Connectors ....................................7 F. Loading and Playing a Disc .......................................
A. Introduction Thank you for choosing the D8000IP portable DVD player. The main features include a 8" Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player with a dock for your IPod. The unit is designed for use with SD/MMC, MS memory cards and USB memory devices. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home.
operation, never cover or block the slots and openings with a cloth or other material. Keep the unit away from an open flame such as fire, candle etc. It is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type, in order to protect the environment, please dispose the battery properly. Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius. 4. Disassembly Do not attempt to disassemble the cabinet.
7.Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. DVD is with other regional codes cannot be played in this unit C. Contents 1. 1 x 8’’ LCD Monitor & DVD Player Combo with dock for iPod 2. 1 x Remote Control with battery (CR2025) 3. 1 x Audio/Video Cable 4. 1 x AC to DC Adapter 5. 1 x Cigarette Lighter Adapter 6. 1 x Rechargeable battery 7.
E. Controls, Indicators, and Connectors 1.
2. Remote Control (Refer to Figure 3) 1) Setup Button 2) Up Button 3) Skip- Button 4) Enter Button 5) Reverse/Left Keypad 6) Down Button 7) Numeric Buttons 8) Display Button 9) Zoom Button 10) Source Button 11) Skip+ Button 12) A-B Repeat Button 13) Forward/Right Keypad 14) 1/All Repeat Button 15) Stop Button 16) Menu Button 17) Subtitle Button Figure 3 18) Audio Button 19) Play/Pause Button F. Loading and Playing a Disc a. After connecting power to the unit, power on “DVD player” with the power switch.
G.
H. Dock for iPod and Playing files stored in your iPod 1. Determine which iPod you have. Note: This unit is for video iPods only. If you have a 30 gigabyte iPod insert the 30 gigabyte adapter (Figure 4) into the iPod dock. You can dock your iPod for playback of stored files and recharging. Only 30G, 60G and 80G iPods with video are supported. Figure 4 2. Tilt the iPod dock upward (Figure 5). If the iPod hits the DVD player screen, tilt the screen backwards. Figure 5 3.
Figure 6 NOTE: If the top of the iPod hits the surface of the DVD player it is not fully seated. Remove the iPod and re-insert it. 6. Set the DVD player to the power-on mode. 7. Press the SOURCE button repeatedly for the iPod input. 8. Select a video and set the iPod to “TV OUT” to watch it on the DVD player’s screen. To play photos in your iPod, you need to press the button on your iPod otherwise there will be no picture on the screen when you play video files in your iPod.
I. Menu A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. J. Display 1. PLAYING TIME AND REMAINING TIME a.
2. SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘Subtitle Off’ is displayed. The Subtitle display will disappear automatically if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
4. A-B REPEAT a. During playback press a first time ‘A-B’ to set the Starting Point A. b. Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. c. Press A-B a third time to cancel A-B repeat and resume normal playback. A-B Repeat Starting Point A-B Repeat Cancelled A-B Repeat Ending Point 14 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
5. REPEAT a. During playback press ‘REPEAT’ constantly to see the repeat mode as right. Chapter: Repeat the current chapter Title: Repeat the current title All: Repeat all chapters and titles Repeat Off: Resume normal playback The ‘Chapter’ repeat display shows below for example: Chapter Repeat Single Elapsed When Playing Audio CDs K. Playing Audio CDs When playing an audio CD press the DISPLAY button constantly on the remote to view time information.
Total Elapsed: The current track playing and the total time that the CD has been playing. Total Remain: The current track playing and the amount of time remaining on the CD. Display Off: The CD time Information will not be displayed. Take ‘Single Elapsed’ display as a example shown above: USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • Track- repeats the track that is playing. • All- repeats the disc that is playing.
4. Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • Repeat One (repeat playback of a song) • Repeat Folder (repeat playback of a specific folder) • Repeat Off (normal playback) As you toggle through the options, the repeat mode changes. The selected repeat mode loops repeatedly until you turn it off.
M. Connecting to other Electronical Equipment 1. Connecting to a TV or another monitor ( Refer to Figure 7) Connect one end of the audio/video cable’s black (1/8” plug) plug into the unit’s DVD AV Out jack, and connect the other end to the AUDIO INPUT jacks on your TV or Monitor through AV adapter cable (white = left channel, red = right channel, yellow=video). Figure 7 Note:Connect the TV or Monitor to AV Out jack on this unit directly (No setting needed in the Source button) 2.
3. SD/MMC/MS Card and USB device Plug the SD/MMC/MS Card or USB device into the SD/MMC/MS Slot or USB slot and press SOURCE button repeatedly on the unit (or on the remote control) to select the USB /SD source. 4. Connecting headphones Connect the headphones into the headphone 1 jack or the headphone 2 jack of your unit. ( Refer to Figure 8) * * Figure 8 Plugging into Headphone jack 1 and 2 disables the internal speakers.
N. Setup 1. General Setup Page 1) With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears and “ ” is highlighted. Press ‘SETUP’ again to exit the Setup Menu. 2) Press the ENTER button, “TV Display” is highlighted. 3) Press the or button to select the other menus in general setup page. to enter the sub menu. 4) Press 5) Press the or button to select the sub menu and press the ENTER to confirm your selection.
d ) Last Memory *On: The unit will return to the last position on the disc. *Off: The unit will not return to the last position on the disc. Note: The Last Memory position function will only work when the disc tray is opened. 2.Video Quality Setup 1)In Setup menu, Press the or button to select “Video Quality Setup” and is highlighted. Press ENTER to enter the video quality setup page. 2)Press the ENTER button, “Brightness” is highlighted.
4) Press to enter the sub menu. 5) Press the or button to select the sub menu and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu. a) Audio b) Subtitle c) Disc Menu Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected language is not available, the player will play and display on the screen the original recorded language contained in the disc.
O. Specifications Compatible DISC: DVD/CD/MP3 Signal system: NTSC Panel size: 8 inch Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4Vrms/10kOhm Audio S/N: Better than 60 dB Dynamic range : Better than 85 dB Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm Power source: DC 9-12V Power consumption: 12 W Operating temperature: 5~35°C Weight : 0.79kg Dimensions (W x D x H): 9.25 X6.77X1.54 inches 235 x 172 x 39 mm Battery Type:Li-polymer P.
battery in optimum condition. Under no circumstances short the battery terminals, store the battery in a metal container, or leave the battery in a humid or damp environment. Ideally, store the battery in an airtight container with desiccant or other dehumidifying agent. Each full recharge takes approximately five-hours and one full charge can provide power to the player for at least 2.5 hours. During recharge, the red indicator in the front of the unit will stay on.
Installing the Battery Pack: 1. First, make sure the player is in “Power Off” mode and that the AC power supply has been disconnected. 2. Flip down the monitor. 3. Push the battery towards the rear flank of the player until it locks into position. The lock position is indicated by a click. The unit will fit snugly to the player. Figure 9. Installing the DVD Player Battery Removing the Battery Pack: 1. First, make sure the player is in “Power Off” mode. 2. Press the release button on the side of battery. 3.
Q. Troubleshooting PROBLEM No sound or distorted sound SOLUTION • Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Can’t advance through a movie • You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The icon ( ) appears on screen The feature or action cannot be completed at this time because: 1.
Troubleshooting (Cont) PROBLEM IR sensor inoperative Disc won’t play Play starts, but then stops immediately SOLUTION • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2007 Audiovox Electronics Corporation 128-8162 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
