Operating instructions

Controls and displays
1
1
9
56
7
4
Remote control
• The following buttons are not used with this receiver:
- PTY ,
1 SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
SLEEP once.
2  RECEIVER
Switches the receiver between standby and on.
3
Switches the remote to control the receiver (used to select the
white commands above the number buttons (
MIDNIGHT ,
etc)). Also use this button to set up surround sound (page 45
)
or Audio parameters (page 34
).
4 INPUT SELECT
Use to select the input source (page 23).
5 Input function buttons
Use to select the input source to this receiver (page 23). This
will enable you to control other components with the remote
control (page 51
).
6 Listening mode buttons
AUTO/DIRECT – Switches between Auto surround mode
(page 31
) and Stream Direct playback (page 32).
ALC/STANDARD SURR (VSX-828 only) – Press for
standard decoding and to switch between the modes of
2 Pro Logic II, 2 Pro Logic IIx, 2 Pro Logic IIz and
NEO:6, and the Auto level control stereo mode (page 31
).
ALC/STANDARD SURR (VSX-528 only) – Press for
standard decoding and to switch between the modes of
2 Pro Logic II and NEO:6, and the Auto level control
stereo mode (page 31
).
ADV SURR – Switches between the various surround
modes (page 32
).
7 Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (
BD , DVD ,
etc.).
Press first to access:
AUDIO PARAMETER – Use to access the Audio options
(page 34
).
HOME MENU – Press to access the Home Menu
(page 45
).
RETURN – Confirm and exit the current menu screen.
Press
BD , DVD or DVR/BDR first to access:
TOP MENU – Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
Press
TUNER first to access:
TOOLS – Memorizes stations for recall (page 29), also
used to change the name (page 30
).
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 29
).
Press
iPod/USB first to access:
iPod CTRL – Switches between the iPod controls and the
receiver controls (page 25
).
8 /// ( TUNE / , PRESET / ), ENTER
Use the arrow buttons when setting up your surround sound
system (page 45
). Also used to control Blu-ray Disc/DVD
menus/options.
Use
TUNE / can be used to find radio frequencies and
PRESET / can be used to select preset radio stations
(page 30
).
9 Component control buttons
The main buttons (  ,  , etc.) are used to control a component
after you have selected it using the input function buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (
BD ,
DVD and CD ). These buttons also function as described
below.
Press first to access:
BASS +/– , TRE +/– – Use to adjust Bass or Treble.
• These controls are disabled when the listening mode is
set to DIRECT or PURE DIRECT.
• When the front speaker is set at SMALL in the Speaker
Setting (or automatically via the Auto MCACC setup)
and the X.Over is set above 150 Hz, the subwoofer
channel level will be adjusted by pressing
BASS +/–
(page 46
).
SLEEP
INPUT
1
4
7
RECEIVER
ENTER
2
5
8
DISP
CLR
3
6
9
0
ENTER
CH
CH
MUTE
RETURN
AUDIO
PARAMETER
MENU
HOME
MENU
RECEIVER
RECEIVER
SOURCE
TOOLS
BAND
iPod CTRL
PTY
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
SHIFT
1
2
11
12
13
14
15
16
3
4
5
6
7
8
9
10
SHIFT
RECEIVER
RECEIVER
RECEIVER