Operating instructions

1
1
Chapter
7
56
7
4
Controls and displays
Front panel
1
INPUT SELECTOR dial
Selects an input source (page 23).
2 SPEAKERS
See Switching the speaker terminal on page 13.
The Speaker System setting may or may not be displayed,
depending on the input source you have selected.
3 MCACC indicator
Lights when Acoustic Calibration EQ (page 33) is on (Acoustic
Calibration EQ is automatically set to on after the Auto
MCACC setup (page 21
)).
4 Receiver control buttons
DIMMER – Dims or brightens the display. The brightness
can be controlled in four steps.
DISPLAY – Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
5 Character display
See Display on page 8.
6
Tuner control buttons
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 29
).
TUNER EDIT – Use with TUNE / , PRESET / and
ENTER to memorize and name stations for recall
(page 29
).
TUNE / – Used to find radio frequencies (page 29).
PRESET / – Use to select preset radio stations
(page 30
).
7 HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 15
).
8 iPod iPhone iPad indicator
Lights when an iPod/iPhone/iPad is connected and iPod/USB
input is selected (page 25
).
9 Remote sensor
Receives the signals from the remote control (see Operating
range of remote control on page 10).
10 MASTER VOLUME dial
11  STANDBY/ON
12
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode (S.R AIR mode can be also selected with
ADAPTER input).
13 MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 21
).
14 Listening mode buttons
AUTO SURROUND/STREAM DIRECT – Switches between
Auto surround mode (page 31
) and Stream Direct
playback (page 32
).
ALC/STANDARD SURR – Press for standard decoding
and to switch between the modes of 2 Pro Logic II and
NEO:6, and the Auto level control stereo mode (page 31
).
ADVANCED SURROUND – Switches between the various
surround modes (page 32
).
56
7
11
12 1514 17 1813
321 8 1049
16
19 20 21 22 23 21
26 27 28 29 29 30
24
25