Owner`s manual

GB - 15
Play Modes for CD or JPG Discs
When playing CD / JPG discs, you can modify the Play Modes through the Toolkit which appears to the right, below
the picture on the screen. Press the
/ button to navigate between the windows and the / button to select files/
tracks or play mode items. Then press the
button to confirm.
1. In Stop mode, press the Cursor buttons (
, , , ) to select "Edit mode" then
press the
button.
2. Use the Cursor buttons (
, , , ) to select tracks/files shown on the left hand
side of the window, then press the
button to confirm the selected tracks/files.
"
" will appear in front of the selected tracks/files.
3. Select "Add to program" then press the
button. " " will disappear from the screen.
It means that the tracks/files you have selected are added into the "Program view".
4. Select "Program view" to view programmed files. To add more files by "Browser
view" follow above steps.
5. Select "Edit mode" again to exit.
6. Use Cursor buttons (
, , , ) to select tracks/files on the left hand side of the window, then press the button
to start the program playback.
The Toolkit has the following play mode items:
• Repeat (Off/Single/All):
Off: Resumes normal playback.
Single: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode (Normal/Shuffle):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
• Edit mode: Program operation works only when "Edit mode" is selected.
• Program view: To view tracks/files in the "Program view" list. It is disabled when the "Program view" list is empty.
• Add to program: Add files/tracks to the "Program view" list. It is disabled if the "Edit mode" is not selected.
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the "Program view" list.
Select a file/track or more you want to delete in stop mode. "
" will appear beside the deleted file/track. Select
"Clear program" and then press the
button. It is disabled if the "Edit mode" is not selected.
Note: The program will be deleted if the
button is pressed twice, the disc door is opened, or selected files are
deleted by selecting "Clear program".
PLAY MODES FOR CD OR JPG DISCS
VIEWING JPG FILES
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable).
Viewing JPG Files
1. Open the disc door.
2. Hold a JPG file disc by its edge and gently push it onto the spindle with the label
side facing up until you hear a “click”.
3. Close the disc door. A list of folders/files will appear on the screen.
4. Press the
or button to select your desired file, the selected picture will appear
at the lower right corner. Press the
button to start playback. Press the button
to display a folder list.
Notes:
• You can press the
button to interrupt playback. Press the button to resume playback.
• You can press the
button to quit playback.
• You can press and hold the
or button for more than 2 seconds to change the picture.
Press and hold the
button for more than 2 seconds to view the previous picture.
Press and hold the
button for more than 2 seconds to view the next picture.
• You can press Cursor buttons (
, , , ) to rotate direction of the picture.
• Some discs may not permit this operation.