User Guide

ManualsBrandsAudiovox ManualsOtherCE112AR

.~-

Operating Instructions

Before operating the unit, please read this manual thoroughly and retain It for future

reference.

CAUTION

The use of optical instruments with this product will increase eye hazard.

INFORMAnON (For the Customers in U.S.A}

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by tuming

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radiorrv technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

For the Customers in the United Kingdom and/Euro~an Countries

This Compact Disc player is classified

as a CLASS 1 LASER product.

The CLASS LASER PRODUCT label is

located on the bottom exterior.

For the Customers In Canada

THIS APPARATUS COMPLIES WITH THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS

SET OUT IN RADIO INTERFERENCE REGULATIONS.

PRECAUTIONS

On safety

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to

disassemble the casing. Refer servicing to qualified personnel only.

Do not put any foreign objects in the safety slot inside the disc compartment. If you do so, the

laser beam may come out when the lid is opened.

Do not put any foreign objects in the DC IN 6V (external power input) jack.

Should any solid objects or liquid fall into the unit, disconnect the power supply and have the

unit checked by qualified personnel before operating it any further.

On operation

Since the CD system offers a wide dynamic range, the peaks of the high level inputs are

recorded with high fidelity, and the noise level is very low. Do not turn up the volume while

listening to a part of the disc with no audio signals or very low level Inputs. If you do so,

the speakers may be damaged when the peak level of the sound is played. The lens on the disc

table should be kept clean. Do not touch the lens or poke at it. If you do so, the lens may be

damaged and the unit will not operate properly.

On installation

Never install the unit where it would be subjected to:

-heat sources such as radiators or airducts.

.direct sunlight.

.excessive dust.

Summary of content (6 pages)

PAGE 1
-.~- Operating Instructions Before operating the unit, please read this manual thoroughly and retain It for future reference. CAUTION The use of optical instruments with this product will increase eye hazard. INFORMAnON (For the Customers in U.S.A} This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
v'~."""'~7~-c,.~.--,.-,"~;:i,,!;:'-; -moisture or rain. -mechanical vibration or shock. -unleveled surface.Do not place any heavy object on top of the unit. .When the unit is used with a AC power adaptor, do not wrap the unit in a cloth, If you do so, the temperature inside and outside the unit may rise considerably, malfunctioning of the unit or serious accidents.If the unit is brought directly from a cold to a warm location, oris placed in a very moisture may condense on the lens inside the unit.
PAGE 3
.-. USING WITH BATTERIES Insert two size M batteries(LR6 or SUM-3 alkaline or rechargeable) according to the Ej;) and e indications in the battery compartment. Notes on batteries .Fully charge the RECHARGEABLE BATTERIES before using it for the first time. -Insert batteries with correct polarity. -Do not use old batteries together with new ones or different types of batteries together.
PAGE 4
During play The track number of the current selection appears. When "POWER OFF I STOP." is pressed during play,total number of tracks on the disc will be displayed and the unit is still on. II "POWER OFF I STOP. " is pressed again the unit will be returned to full stop mode. II "PLAY" is pressed the unit returns to play mode. The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is played again within the 30 seconds.
PAGE 5
"C"","". .-~.-.~,,!!;~ .To repeat program play, press "REPEAT/ENTER". .If "STOP" is pressed or if the lid is opened, all the programs would becleared. .If the program mode is exited by means of the "PLAY MODE" key, all the programs would still remain in memory. .During the program play, the AMS operates in the programed order. Program Edition To check: Press "REPEAT/ENTER" lightly during programming before you press ..II Each time "REPEAT/ENTER" is pressed the track number appears in the display window.
PAGE 6
~ Should any problem persists after you have made the following checks, consult your nearest service facility. Disc play does not start:.The LOCK switch of the CD player or the wired remote control( if supplied) is set to LOCK. The disc is inserted upside down or incorrectly. Insert the disc correctly with the label surface up. Dusty or defective disc. Dirty or dusty lens. .The disc compartment lid is not closed. Moisture condensation -> Leave the unit in a warm place until the moisture evaporates.