Service manual

Installing the Audiovox CCS100 Cruise Control on the
Honda Pacific Coast PC800 Motorcycle
Page 30
Copyright © 2001-2006 by Bruce Pickett. Copying or printing for personal use is permitted. All other rights reserved. January 21, 2006
RESUME
Whenever you use the brakes to slow or stop the vehicle, the cruise control will disengage but
retain the programmed SET SPEED. To return to the SET SPEED, accelerate to a speed above
35 mph, then press and release the RESUME/ACCEL switch. The vehicle will automatically
accelerate to the programmed SET SPEED, and hold that speed. When using the RESUME
feature, you should be in the correct gear for your SET SPEED.
DISENGAGE
You can disengage from the SET SPEED in several ways:
Gently tap the brakes to activate the brake lights.
Turn the control switch to the OFF position.
Press the clutch. This will cause the engine to rev slightly before disengaging.