Service manual

Installing the Audiovox CCS100 Cruise Control on the
Honda Pacific Coast PC800 Motorcycle
Page 9
Copyright © 2001-2006 by Bruce Pickett. Copying or printing for personal use is permitted. All other rights reserved. January 21, 2006
Attaching the Vacuum Canister
The vacuum canister is attached to
frame struts under the front left
fairing near the connection point for
the left mirror. With the hose barbs
on the vacuum canister pointed down
and to the rear, attach it to the lower
of the two fairing side struts with
several long, sturdy cable ties. Make
sure that there is sufficient space to
attach the vacuum hoses to the hose
barbs on the canister.
Vacuum Connections
Use the long rubber vacuum tubing supplied in the CCS100 kit. Additional tubing and fittings
may possibly be needed, depending upon how many connections are made.
These instructions call for making connections to both carburetors' vacuum ports. It is suggested
that both ports are necessary to provide sufficient suction for the cruise control vacuum system.
If, however, you choose to use only a single vacuum port, simpler connections may be made
using only the #2 carburetor's vacuum port.