Owner's Manual

Programming Note: ®
The default wire function settings are listed next
to the wire color. Wires shown with ® can be
1 programmed to perform different functions.
Refer to the Feature Programming section to
change the default setting.
·- - - - - - - - - - - - - - - - - - - - - - -
87
Power I Notification
Harness (12-Pin)
Replacement Part
# 4360957
Replacement Part
# 4120402
LED (2-Pin)
Replacement Part
# 1024363
Input / Output
Harness (1 0-Pin)
Replacement Part
# 4120403
Valet Harness (2-Pin)
Replacement Part
STARTER INTERUPT RELAY & HARNESS
Replacement Part #1024405
# 1024389
86 - ARMED OUTPUT ( - )
85 - IGNITION ( +)
BROWN
RED
BLACK
BROWN/BLACK
VIOLET/BLACK
VIOLET
GREEN/BLACK
WHITE
WHITE/RED
WHITE
WHITE/BLACK
BLUE/BLACK
SHOCK SENSOR PORT
LED PORT
PURPLE
GREEN/BLACK
OPEN
GREEN
ORANGE
BROWN/BLACK
VIOLET/BLACK
GRAY
YELLOW
RED/WHITE
SIREN OUTPUT ( + )
BATTERY 12V ( +)
GROUND
UNLOCK SWITCH ( 87A)
UNLOCK POLARITY ( 87 )
LOCK POLARITY ( 87 )
LOCK MOTOR ( 30 ) ®
PARKING LIGHT OUTPUT ®
PARKING LIGHT INPUT
PARKING LIGHT OUTPUT ®
LOCK SWITCH ( 87 A )
UNLOCK MOTOR ( 30 ) ®
DOOR TRIGGER INPUT ( + )
FACTORY DISARM OUTPUT ( - ) ®
DOOR TRIGGER INPUT ( - )
ARMED OUTPUT (-) ®
HORN OUTPUT ( - )
AUX 1 OUTPUT ( - ) ®
HOOD PIN INPUT ( - )
IGNITION INPUT ( + )
TRUNK RELEASE OUTPUT ( - ) ®
PROGRAMMING/ VALET PORT
DBI PORT
Installation Note:
I 87a I
86 I 85
ORANGE
RED
BLACK
WHITE/ BLACK
OPEN
87A- STARTER OUTPUT- MOTOR SIDE
30 - STARTER INPUT - KEY SIDE
The module should be securely attached to a
stable surface using zip ties in order for the
1
on-board shock and tilt sensor to function properly. •
I I
30
87 -OPEN
·- - - - - - - - - - - - - - - - - - - - - - - - .J