Installation guide

Operating the Daily Start Timer
The system has the ability to start your vehicle based on a 24-hour countdown
timer.
This feature requires a two-part activation sequence. From the remote,
pressing both the
(2) & 0 buttons together will activate the 24 hour countdown
timer (the vehicle will start
24 hours from this time). Next, When you are finished
operating the vehicle for the day, perform the following steps to complete the
process.
1. Turn the ignition ON/OFF (vehicle must be disarmed).
2. Within 10 seconds, while pressing the brake, press and release the
0
button twice.
3.
The vehicle will emit 2 chirps.
Remote Start Safety Features
For safety and security reasons, the system will shutdown or prevent the remote
vehicle starter from activating if
any of the following occur:
1.
The vehicle hood Is open.
2.
The brake pedal is pressed prior to turning the ignition key to the ON
position.
3.
The engine is over-rewed (tach checking only).
4. Valet
mode is active.
2010 Audiovox Electronics Corporation. All rights reserved.
9