Operating instructions
BT1611i
allowing the radio to stop
at
a broader range
of
signals.
To
set the unit to select only strong
local stations during automatic tuning, turn the
AUDIO CONTROL to choose "Local".
VOL
PGM (00-46)
Use the "VOL PGM" option to select the default
volume the radio will assume when first turned
on.
To
program a specific start-up volume level,
turn the AUDIO CONTROL to select the
desired level.
BEEP TONE
The beep tone feature allows the selection
of
an
audible beep tone to be heard each time a
button
is
pressed
on
the face
of
the radio.
"BEEP TONE On" is the default display. Turn
the AUDIO CONTROL to select the "BEEP
TONE
Off'
option.
iX-BASS
Press the
BASS
button (15) to activate the iX-
BASS feature. When listening to music at low
volume levels, this feature will boost the bass
and treble ranges to compensate for the
characteristics
of
human hearing. Press BASS
again to deactivate this feature.
Subwoofer
Press
th
e
SU
B button (18) to activate the
Subwoofer function. Press again to turn the
Subwoofer function off.
NOTE: The
Subwoofer
feature
only
works
when an external
amplifier
and
subwoofer
are connected via the
Sub
line
out
connection
on
the
back
of
the unit.
Liquid
Crystal
Display
(LCD)
The liquid crystal display (LCD) panel (8)
displays the frequency, time and activated
functions
of
the unit.
NOTE:
After
being
subjected to
cold
temperatures, LCD panels
may
take
longer
to respond
and
visibility
of
the numbers
on
the LCD
may
decrease slightly.
The
LCD
display
will
return to normal when the
temperature increases
to a normal range.
Auxiliary
Input
Use the Aux
In
cables
on
the back
of
the unit to
connect a portable media device for playback
through the vehicle sound system.
To
access
the Auxiliary Input mode, press the MODE
button (2) until "AUX" is indicated
in
the display.
Front
Panel
Release
The front panel release button (10) releases the
mechanism that holds the front panel to the
chassis.
9
Detaching the Front Panel
To
detach the front panel, first press the front
panel release button (10) to release the len side
of
the panel. Next, grasp the released side and
pUll
it
off the chassis. After removing the front
panel, store
it
in
the supplied carrying case to
protect
it
from dirt and damage.
REMOVE FRONT PANEL
Re-attaching the Front Panel
To
re-attach the front panel, make sure the
electrical terminals on the back
of
the panel are
free
of
dust and dirt,
as
debris could cause
intermittent operation or other malfunctions.
Position the right side
of
the panel
in
place
so
that
it
is
correctly engaged, then lightly press
the len side
of
the panel until the mechanism
locks
it
into place.