Operating instructions

BT1611i
Removing the Radio
To remove the radio after installation, remove
the trim ring by lifting
in the center and pulling it
off from either side. Insert the removal keys
straight back until they lock, and then pull the
radio out. If removal keys are inserted at an
angle, they will not lock properly to release the
unit.
Removal Key
Fuses
When replacing a fuse, make sure the new fuse
is the correct type and amperage. Using an
incorrect fuse could damage the radio. The
8T1611
i uses one 15 amp fuse located below
the wiring connector (15 amp fast blow ATO).
5