Operating instructions

BluetoothQuickStartGuide~~~~~~·~~~~~~~~~~-
Q: If the Mobile Phone already paired with the headunit, but after several calls, the incoming calls cannot
access thru the headunit
A: May be the paired Mobile Phone lost the Bluetooth connection with the headunit. in this case, please go to
the "MENU" & select "re-connect" to reconnect the headunit with the paired Mobile Phone. For details, please
refertothe MENU operation "re-connect".
Bluetooth Hand Free Panel Function Key Matrix
• Answering an incoming call
1. When there is an incoming call, the LCD Display will display "Caller Number" and keep blinking.
2. Press "AUDIO" button to accept the call.
3. You can use the volume up/down to adjust the volume level.
4. To end the conversation, press "Clear" button. The unit will smich back to the previous mode automatically.
Full details of Bluetooth compatibility and operation, together with all the other Bluetooth functions are fully
described
in the enclosed instruction manual.
G=>~§)a[§-""",
LINEA..R
By JENSEN
1. Reject Incoming call
2. Edit Number
Bluetooth Hand Free Function
Transfer Phone Conversation backward to
Mobil Phone
Use for numeric input
Move Cursor and Edit Number
Enter Phone number input mode
Pairing / Re-Connection etc
Note: See Menu operation for more details.
Confirm Dialing the input Phone Number
Confirm Dialing the input Phone Number
008
0
Panel Function Button
1
AUDIO
Short Press
Long Press
2
Encoder volume Knob
3 BAND
4
MODE
Short Press
Long Press
5
MENU
6
Tune Up / Down
FAQ (Frequency Asking Questions)
Q: Under phone conversation, ifthe voice outputfrom the car's speakers is not loud enough.
A: Try increase the volume level ofthe Head Unit to a suitable sound level
Q: Under phone conversation, the "Listener" cannot hearing my voice loud enough
A: First, try asking the "Listener" increase the volume level on his/her Handphone, if still not loud enough,
try to increase your Mobile Phone'svolume.
Q: Under Phone conversation, the"Listener"can hear echo feedback.
A: Your unit's speaker volume level is too loud which cause the voice feedback into the built-in
microphone, this can be corrected by decreasing the volume level.
Q: Under Phone conversation, the "Listener" complain the background is too noisy
A: May be you are in a noisy environment. Try close the car's window to shield the environment / background
noise under phone conversation.
We want you to be able to start using this integrated Bluetooth handsfree
kit straight away,
but because we've packed so many features into your
new Bluetooth Head Unit, so please spend a moment to study this Quick
Start Guide to
get you started quickly.
User Tips
1. When you use our Bluetooth Head Unit, please make sure the mobile phone you use must / does support Bluetooth
functions (Headset or Handsfree profiles or both)
2. Before
you start to use our Bluetooth Head Unit, please make sure complete pairing with your mobile phone first. Please
refer
to the user manual, section "PAIRING" for detail "PAIRING" instruction. To ensure the best reception for Pairing or Re-
connection, please make sure the Phone Battery is fully charged when making the Pairing or Re-connection.
3. Please always try pairing the Mobile Phone with Head unit after a few minutes of the Mobile Phone was Switched On to
ensure the best pairing result.
4.
"BT60" is this unit device model number which is displayed on the mobile phone.
5. To achieve the best performance, please always keep the Mobile Phone within 3 meters of the Head Unit.
6. Please always keep a clear path between the Mobile Phone & the Head Unit.
7. Never
put any metal object or any obstacle between the path of the Mobile Phone & the Head Unit.
8.
Some brand of Mobile Phone like Sony Ericsson may have "Power Saving Mode" selection when Bluetooth mode is
switched on. PLEASE DO NOT Switches ON Power saving Mode when operating with this Head Unit, as some abnormal
communication behavior will happen occasionally if Power Saving Mode is switched on.
9. Before
user make Outgoing call or Incoming call, make sure the mobile phone's "Bluetooth function" was switched "ON".
10.
To ensure the best conversation quality / performance, please always keep talking within 1 meter of the Head Unit.
11. If
user want to Dis-connect the Head Unit with the Mobile Phone, please switch "OFF" Bluetooth connectivity on the
Mobile Phone,or go to the system menu, "dis-connect" to disconnect the Bluetooth connectivity manually. ( please refer to
the user manual, section "dis-connection of the Bluetooth system for details instruction. )
12.
Some Mobile Phones can support "IN BAND RING TONE", such as Nokia. In such case, the Incoming Ringing Tone will
be same as the original Ring-tone of the Mobile Phone. But some Mobile Phones like Sony Ericsson do not support this
feature.
The Ring-tone will be using the standard Ring-tone of the Head Unit.
13. When in
telephone mode, during talking, it is highly recommended to set the volume to below "30" in order to achieve the
best sound quality. As if the volume is too high, it may create unwanted echo inside the car, and this unwanted echo may
feedback into the microphone.
14. If the Bluetooth related operation is not performing normally, like cannot make pairing, cannot making an outgoing call,
User can try to make a SOFT-RESET of the Bluetooth module by removing / detaching the panel from the main unit and
waiting for about 1 min. Then re-attach the panel to the unit & retry the Bluetooth operation again. Or user can RESET the
whole unit by pressing the RESET button behind the panel.
~ By pressing the RESET button all the stored memory will resume to factory default
• Making an outgoing call
1. You can use your Handphone to dial and make an outgoing all. Once the user has completed the dialling, the display should
show" CALLING ".
m:;> 1. The audio output of the present mode will ONLY be muted after pressing the "PHONE" button as a confirmation to dial
the
outgoing call.
2. While there is an outgoing call or under talking mode, the Panel Open/Eject key is dis-activated.
2. During the talking mode, the LCD Display will display the duration of the conversation.
3. User can use the
volume up/down to adjust the volume level.
4. To end the conversation, press the "Clear" button. The unit will switch back to the previous mode automatically. The mute of
the previous mode will be released at the same time.
5. During the talking mode, if the Ignition is being turned off,
the unit will keep the conversation even if the Ignition is Switched off.
After finished the conversation, User can press "Clear" button
to switch off the unit.
Quick Start Guide
1. Ensure your Mobile Phone is turned to pairing mode. For details, please refer to the instruction booklet of your Mobile Phone.
2. Long press "MENU" button for 3 seconds to enter pairing
mode.
3. Press "AUDIO" button to activate the pairing.
4. You will see "BT60" on your mobile phone. Please select "BT60" and then input password "1234".
5. If the pairing is successful, the unit's display will
show Mobile Phone name or model number.
6. If the pairing failed, "
PAIR FAILED" will be flashing on the display for 3 seconds and it will return to the previous mode
automatically.