Operating instructions
BT1611i
NOTE: When a
call
comes
in
during
stand-
by
mode
(ignition
on/power
off), the head
unit
will
turn
on
automatically
so
you
can
accept/reject the call.
NOTE: When a
call
comes in
during
talking
mode, the OPEN/EJECT button (31)
becomes deactivated.
Answering
an
Incoming
Call
To
answer the incoming call, press the AUDIO
CONTROL (DIAL) button (3).
NOTE:
During
an
incoming
call, the audio
output
is
muted
and
a ringtone is played.
CD
play
is
paused.
Use the
AUDIO
CONTROL
(3) to adjust the
volume during your phone conversation. During
an
active call, the LCD will display "Phone
»»"
followed by the the elapsed call time.
To
end the conversation, press the B (CLEAR)
button (5).
Rejecting an
Incoming
Call
Press the B (Clear) button (5) to reject an
incoming call.
Making an Outgoing Call
1. Press the AUDIO
CONTROL
button (4) to
begin an outgoing call. The LCD will dis-
play
~I
and a cursor will
blink while waiting for the phone number
entry.
2.
Turn the AUDIO CONTROL to select 0-9,
*,
and # to input the phone number,
pressing the AUDIO
CONTROL
to confirm
each selection. Press the B (CLEAR)
button (5)
to
clear the last digit,
or
use the
Up Tuning (14) or Down Tuning (13)
buttons to move the cursor back or
forward to the incorrect input digit and then
press B.
3.
After entering the phone number, press
and hold the AUDIO
CONTROL
or press
the MODE button (2) to dial the call.
NOTE:
The
audio
output
will
only
be
muted
after
the PHONE
button
is
pressed
to
dial
the
outgoing
call.
NOTE:
During
an
outgoing
call
or
during
talking mode, the OPEN/EJECT
button
(31)
becomes deactivated.
2S
Use the AUDIO
CONTROL
(3) to adjust the
volume during your phone conversation.
To
end
the conversation, press the B (CLEAR) button
(5).
If the ignition is turned off during a call, the unit
will remain on, allowing you to complete the
call, until you press the B (CLEAR) button to
turn the unit off.
The
unit
will
continue
to
operate on battery power until
it
is
turned
off.
Call
Transfer
While talking, to transfer audio from the head
unit back to the mobile phone, press the MODE
(Transfer) button (2). The LCD will display
TRANSFER
....... for 3 seconds.
When making an outgoing call, it's not
possible to transfer the call if it is not yet
answered. You can only transfer a call
after it has been answered.
The time
it
takes to transfer the call back
to the phone will vary depending on your
phone model.
NOTE:
The
BT1611i can
only
handle one
call
at
a time, two lines
cannot
be active
at
one
time even
if
your
phone
has
call
waiting.