Operating instructions
To
stop recording before the file is complete,
press the Record button. The LCD will display
f;:ec.
•
U=::::!t~
(or CARD) and the
incomplete track will be deleted from the
destination folder.
NOTE:
Never
remove
a USB device
during
recording
or
music
transfer. This
may
damage the
device
or
cause the
system
to
lock
up.
Do
not
switch
modes
or
turn
the
radio
power
or
ignition
off
while
recording.
Transferring
MP3/WMA
Music
Your BT1611 i is equipped with a Music Transfer
feature that allows you to record music from
various sources to an SD/MMC card or USB
device.
To
Transfer music, perform the
following steps:
1.
Play the media from which you would like
to record.
2.
Press the RECORD button (20) to activate
the Transfer feature.
3.
Turn the
AUDIO
CONTROL
(3) to select
the USB or CARD (SD/MMC) source.
4.
Press the
AUDIO
CONTROL
button (4) to
begin recording.
The unit will begin recording the
current file, starting at the beginning
of
the track. The LCD will display
H~1
~.~
~:;-:::.
USE:
.Recording will
stop at the end
of
the file.
The
ncurded
information is stored
in
a folder named "MY_MP3" or
"MY
wr..,~A"
on the destination
source.
Recording will stop and the unit will
display "Memory Full" if the selected
storage device is full.
To
stop recording before the file is complete,
press the Record button. The LCD will display
~
•
n.y::,t:;
(or CARD) and the
incomplete track will
be
deleted from the
destination folder.
NOTE: When
recording
from
CO
the
song
is
played
from
beginning
to
end. When
copying
a MP3
or
WMA
file from
any
source
the file
is
simply
copied
and
stored,
not
played
like
CD.
Erasing Recorded Files
You can erase recorded files from a USB
device
or
SD/MMC card while the file is playing,
or after selecting the file
in
Number Search or
Navigation Search mode.
To
erase a file,
perform the following steps:
1.
Press
and
hold
the
BAND
button (5) to
activate the Erase function. The LCD will
display
EFASE
@j~j1E1.
2.
Press the AUDIO CONTROL button (4) to
select Erase mode.
20
BT1611i
3.
Turn the
AUDIO
CONTROL
(3) and select
+Jl
to erase (or select
:x
to cancel ttle
erase function).
4.
Press the
AUDIO
CONTROL
button to
confirm. The file will stop playback
(if
playing) and will
be
erased. When
finished, the system will display
ERASE
b1../.
File
Management
Music recorded or transferred using the
BT1611 i will be stored
in
the default folders
listed below:
MY_CD: Music Recorded from a CD.
MY MP3: Transferred MP3 files.
MY_\MIlA: Transferred
\MIlA
files.
Recorded/transferred music is stored
in
the
corresponding folder and given the following
naming convention: "XX0001.MP3", where XX
is the name
of
the source (Le. CD0001.MP3).
NOTE: MY_ AUX, MY_FM, MY_iPod,
and
MY_XMare
set
up
on
the
destination
source
(SO,
USB) as
well
as
the
above
mentioned;
however, these
sources
are
not
applicable
for
this
model.