Owner's Manual

ManualsBrandsAudiovox ManualsCar Audio & VideoVoxx

Owner's Manual

Universal Seatback

In-Vehicle Entertainment System

Summary of content (52 pages)

PAGE 1
Universal Seatback In-Vehicle Entertainment System Owner's Manual
PAGE 2
Congratulations Congratulations on your purchase of this In-Vehicle Entertainment System! The system has been designed to provide passengers with unlimited content options delivering smiles for many miles. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
PAGE 3
TABLE OF CONTENTS System Features �� 5 Accessories �� 6 Monitor Features (SB10MD1)
PAGE 4
SB10MD1 FEATURES SB10M1 FEATURES • Android Operating System • Android Operating System • Quad-core Processor • Quad-core Processor • RAM (8GB) • RAM (8GB) • Internal Memory (8GB) • Internal Memory (8GB) • 10.1" TFT LCD Display (1024x600) • 10.
PAGE 5
ACCESSORIES Wireless Headphones Each monitor includes a built-in dual channel infrared transmitter for use with the included wireless headphones. The wireless headphones must be used within a direct line of sight from the screen. Infrared transmission, like visible light, travels only in a straight line. How to Use the Wireless Headphones When wearing the headphones, make sure to observe the “Left” and “Right” labels. The headphones must be oriented correctly in order to receive the audio signal.
PAGE 6
MONITOR FEATURES (SB10MD1) 1. D VD Disc Eject Button This button is used for ejecting a disc from the built-in DVD player. 6. W ired Headphone Jack For use with wired headphones equipped with a 3.5mm cable. 2. Power Button This button is used to turn the system ON/OFF. 7. M icro SD Card Slot This input supports media playback from micro SD cards (up to 64GB). 3. Home Button This button is used to display the Home Menu Screen. 4.
PAGE 7
MONITOR FEATURES (SB10M1) 1. Power Button This button is used to turn the system ON/OFF. 6. W ired Headphone Jack For use with wired headphones equipped with a 3.5mm cable. 2. Home Button This button is used to display the Home Menu Screen. 7. USB Port This input supports media playback from a USB thumb drive (up to 64GB). This port will also support USB charging (1amp) to provide power to a device that requires external USB power. 3.
PAGE 8
GETTING STARTED Power Button Home Button 1. To start the system, the vehicle ignition key switch must be in ACC or engine ON position. 2. T he Power Button and Home Buttons will flash RED and BLUE while the system is booting up. Once the boot up process is completed, the Power Button and Home Buttons will turn RED, and stay in the Standby position. It will take approximately 12 seconds to 15 seconds to complete the system boot up process. 3.
PAGE 9
HOME MAIN MENU SB10MD1 10 SB10M1
PAGE 10
SYSTEM APPLICATIONS This system comes pre-loaded with the following apps: Google Play Store, Chrome Browser, and Netflix. You may also log into the Play Store with your Google account and download your favorite apps directly. If you do not have Google account, creating one is easy and free. 1. Connect the SB10MD1 and SB10M1 monitors to a Wi-Fi hotpsot. Refer to page 19 for details. 2. Select "APPS" from the main menu screen. 3.
PAGE 11
SMARTSTREAM ANDROID 1. Select the SmartStream icon on the Main Menu. 4. S elect the Mirroring function on your Smartphone. Your Smartphone will start searching for devices. *See your Smartphone's Operation Manual for details on how to operate screen mirroring. 5. A fter searching is completed, the monitor name will appear on your Smartphone screen. Select the monitor name displayed on your Smartphone. Searching for devices... 2. Select the Android icon on the screen.
PAGE 12
SMARTSTREAM iOS 1. Press the SmartStream icon on the Main Menu. 3. S martStream does not support iOS devices due to Apple limitations in wireless content transfer. Each system monitor will display a message describing this limitation. Due to this limitation, please connect your iOS device using the HDMI input on the SB10M1 monitor. SB10MD1 Screen Message 2. Select the iOS icon on the screen.
PAGE 13
SMARTSTREAM iOS (CONTINUED) 4. P lease use a genuine Apple HDMI Adaptor & HDMI Cable to connect your iOS device to the SB10M1 monitor's HDMI Input and select HDMI as the video source to play content from your iOS device. Aftermarket Apple HDMI adapters may not function properly with the system. HDMI Cable
PAGE 14
USB & SD CARD PLAYBACK USB PLAYBACK SD CARD PLAYBACK 1. Insert a USB storage device into either monitor's USB port. 1. Insert a Micro SD Card into either monitor's SD card slot. 2. Select USB source in the Main Menu. 2. Select SD source in the Main Menu. 3. Select the file type: Video, Music, or Photo. 3. Select the file type: Video, Music, or Photo. NOTE: The USB and SD card inputs on each monitor will support a maximum storage media size of 64GB.
PAGE 15
WIFI DUAL SCREEN Wi-Fi Dual Screen allows you to wirelessly share content between monitors in high-resolution. Either monitor can be setup as the Transmitting or Receiving monitor. 1. To setup each monitor as a Transmitting or Receiving monitor, select WIFI Dual Screen from each monitor's main menu. 3. The Receiving monitor will display its Device Name as shown below. 2. To setup a monitor as the Transmitting Monitor, press the Transmitting Monitor icon.
PAGE 16
WIFI DUAL SCREEN(CONTINUED) 5. Select the Receiving Monitor by pressing the Device Name. The Transmitting monitor will then establish a connection to the Receiving Monitor. Once a connection is established, "Connected" will appear under the Device Name. Transmitting Monitor 6. Once connected, the Receiving Monitor will mirror the Transmitting Monitor in high resolution. Transmitting Monitor Receiving Monitor 7.
PAGE 17
DUAL SCREEN Dual Screen allows you to share content between monitors in standard resolution. 1. To mirror content from one monitor to the other, select Dual Screen on the receiving monitor. 2. To stop mirroring content on the receiving monitor, press the Home button on the receiving monitor. NOTE: Dual Screen mode can only be selected on one monitor at a time. If Dual Screen mode is selected on both monitors at the same time, a white screen will appear on both monitors.
PAGE 18
WIFI SETUP 1. Select SETUP in the Main Menu. 3. Select a Wi-Fi network from the available list. Vehicle Wi-Fi Mom's Phone Dad's Phone 2. Select WIFI from the setup menu. Turn ON the WIFI and then touch the WIFI bar to see a listing of available Wi-Fi networks. 4. Touch the line to enter the password, and the on-screen keyboard will appear. Enter the Wi-Fi password, then press "CONNECT". Vehicle Wi-Fi Mom's Phone Dad's Phone 5. The monitor will now connect to the Wi-Fi network.
PAGE 19
VOXX LINK Voxx Link is an APP developed for Android and Apple smartphones and tablets that allows full system remote control and visual monitoring of the system without having to directly see or directly touch the monitors. This is a great tool to allow content selection and control of the system for actual users who may be infants and toddlers, too young to control the system themselves.
PAGE 20
INSTALL 18:00 80% ᱘ HDMI USB SmartStream WFMM ᱘ SD IR TRANSMITTER SCREEN OFF Google Play VOXX LINK SCREEN OFF LANGUAGE ABOUT DEVICE VOXX LINK Kevin_Android_R&D WIFI DUAL SCREEN SETUP APPS DUAL SCREEN VOXX LINK (CONTINUED) RESET Tools INSTALL ᱘ HDMI WIFI USB SmartStream VOXX LINK WFMM ᱘ SD IR TRANSMITTER LANGUAGE 18:00 WIFI DUAL SCREEN Scan Personal Hotspot ABOUT DEVICE SCREEN OFF 80% TP-LINK_72DA Secured with WPA/WPA2 Secured with WPA/WPA2 ᱘ TP-LINK_363C Secured
PAGE 21
WFMM (WIRELESS FM MODULATOR) WFMM allows you to broadcast audio content from either system monitor to your vehicle's factory audio system through an FM station. Only one monitor can transmit audio to the factory audio system at one time. Make sure only one monitor's WFMM transmitter is "ON" at a given time to prevent interference. 1. Select SETUP in the Main Menu. 2. Select WFMM inside the SETUP screen. 3. Touch the ON button to turn ON the WFMM, touch the OFF button to turn OFF the WFMM. 22 4.
PAGE 22
IR HEADPHONE TRANSMITTER 1. Select SETUP in the Main Menu. 3. Touch the ON or OFF button to turn ON or OFF the IR Transmitter. 2. Select IR Transmitter inside the SETUP screen. 4. S elect the desired Channel (A or B) for the IR Transmitter. It is recommended to select Channel A for one monitor and Channel B for the other monitor. Set the switch on your IR Headphones to channel A or B to listen to the audio from the monitor you prefer.
PAGE 23
USER INTERFACE LANGUAGE 1. Select SETUP in the Main Menu. 2. Select Language inside the SETUP screen. 24 3. Select your preferred language.
PAGE 24
ABOUT DEVICE - CHECK FOR UPDATE 1. Select SETUP in the Main Menu. 3. A notification message will appear on screen if a software update is available for the monitor. Each system monitor will need to be updated independently. Press Yes to begin the download process, or press No to update the software at another time. 2. S elect "ABOUT DEVICE" in the SETUP screen, touch the "CHECK FOR UPDATE" button to check for new software availability.
PAGE 25
ABOUT DEVICE - CHECK FOR UPDATE (CONTINUED) 1. T his message will appear on the screen if the monitor is not connected to a Wi-Fi hotspot. 2. T his message will appear on the screen if the software version is already up to date. 26 NOTES: As long as the system monitors are connected to a Wi-Fi hotspot, the monitors will be able to receive software updates when they become available.
PAGE 26
DEVICE NAME ACCOUNTS 1. 1. Select SETUP in the Main Menu, then select "ABOUT DEVICE" in the SETUP screen. 2. T ap "DEVICE NAME" three times to display the keyboard. When you are finished renaming the monitor, press "OK" to save the new monitor name into memory. Renaming the monitor allows you to uniquely identify it on the network when using the Voxx Link APP. Refer to page 20 for more details. Select SETUP in the Main Menu, then select "ABOUT DEVICE" in the SETUP screen. 2.
PAGE 27
TIME ZONE RESET 1. Select SETUP in the Main Menu. 1. Select SETUP in the Main Menu. 2. S elect "ABOUT DEVICE" in the SETUP screen, touch the "ZONE" button to set the time zone to your local time zone. 2. S elect "RESET" inside the SETUP screen. Touch the "Factory Setting" button to reset all monitor settings back to factory defaults. NOTE: The correct ZONE setting may be needed for streaming service APPs in order to display program guides and TV show listings for your local area.
PAGE 28
VOLUME CONTROL & BRIGHTNESS CONTROL VOLUME CONTROL (WIRED HEADPHONES ONLY) BRIGHTNESS CONTROL 1. T ouch the Volume Button inside the Info Bar to change the volume settings for optional wired headphones connected to the 3.5mm port on the side of each monitor. 1. T ouch the Brightness Button inside the Info Bar to change the brightness settings. 2. Touch and slide the volume level indicator to the right to increase the volume, and to the left to decrease the volume. 2.
PAGE 29
DVD PLAYBACK (SB10MD1 MONITOR) DVD Region Code Supported Disc Types The DVD player is preset to a region code at the factory depending on where the DVD player is sold. A DVD from a different region cannot be played in this unit and the unit will display "WRONG REGION”.
PAGE 30
MEDIA & FILE TYPE COMPATIBILITY Media Compatibility Supported Formats •• The metadata or file information of some audio and video files may not be correctly displayed. VIDEO This system is compatible with the media formats listed in the table below. •• Some content that is protected by DRM (Digital Rights Management) may be in a format that is not supported by this system. drives or SD cards with complex folder hierarchies or many files.
PAGE 31
TROUBLESHOOTING Symptom Remedy Monitor does not power on Verify the vehicle is in the ON/RUN or ACC position. If the Power and Home buttons on each monitor are not illuminated, verify the cable connection to each monitor and/or the power and ground connections to the vehicle. Monitor frozen - will not respond Soft reset each monitor by turning each monitor off, then back on again.
PAGE 32
TROUBLESHOOTING (CONTINUED) Symptom HDMI input not working Remedy Some mobile devices may require a special HDMI cable and/or adapter. Contact your HDMI device supplier for the HDMI cable and/or adapter. Some devices may need to boot up before showing picture. Ensure you are using an OEM branded (Apple, Samsung, etc.) HDMI cable and/or adapters. Generic HDMI cables and/or adapters may not function properly with this system.
PAGE 33
GENERAL SPECIFICATIONS 34 Display Type 10.1" Capacitive Touch Screen, Resolution: 1024 (RGB) x 600 LCD Backlight Type LED Backlight Life: 20,000 Hours Supported Disc Types DVD (Single, Dual Layer), DVD-R/+R, DVD+R Dual layer, DVD-RW/+RW, CD, CD-R, CD-RW General Operation Voltage: 10.5VDC ~ 16VDC, Operation Power: 18W max @ 12VDC, Operation Temperature: 32 ~ 131°F (0 ~ 55°C) Frequency Response 40Hz ~ 20kHz +/- 3dB HDMI Support Version 1.4b, HDCP 1.
PAGE 34
COMPLIANCE INFORMATION FCC Notice This device complies with Part 15 of FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
PAGE 35
COMPLIANCE INFORMATION FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
PAGE 37
QUICK START GUIDE 10.1" SEATBACK IN-VEHICLE ENTERTAINMENT SYSTEM Congratulations on the purchase of your In-Vehicle Entertainment System I This Quick Start Guide is a brief tutorial allowing you quick access to enjoying your new system. You will find the system very user friendly and intuitive but in the event you need further information on how to operate your system, please go to the following URL to review or download the complete Operation Manual: www.voxxintl.
PAGE 38
SB10MD2 OVERVIEW WITH DVD PLAYER 9 12 8 10 11 2 [Dl [51 ••• ••• ••• WIFI DUAL SCREEN DUAL SCREEN APPS ~ 7 8 1. DVD Player- Plays DVDs, CDs, MP3 discs 2. Eject Button - Eject a DVD, CD, or MP3 disc (on top of monitor) 3. Micro SD Card Input - For SD Media Playback 4. USB Input - For USB Media Playback and Charging Support 5. Headphone Output - For use with Wired Headphones 6. Reset - Reboots the Monitor 7. Power - Turns the Monitor On/Off 8. Home - Returns to Home Screen 9.
PAGE 39
SB10M2 OVERVIEW WITHOUT DVD PLAYER 8 7 9 10 11 5 2 @ .... [51 [Bl OUALIClllEEN Wlfl DUAL ICflEEN 3 A.PPS 1 @) 6 ••• ••• ••• ___i---4 7 1. HDMI Input - Connect HDMI Devices such as Smart Phones or Game Consoles 2. Micro SD Card Input - For SD Media Playback 3. USB Input - For USB Media Playback and Charging Support 4. Headphone Output - For use with Wired Headphones 5. Reset - Reboots the Monitor 6. Power - Turns the Monitor On/Off 7. Home - Returns to Home Screen 8.
PAGE 40
FIRST TIME SETUP Powering up the System 1. When vehicle power is applied to the system, the POWER and HOME buttons on each monitor will flash RED/BLUE for approximately 12 to 15 seconds and then the buttons will remain solid RED. This is normal and a notification that the system is booting up. Once the POWER and HOME buttons are solid RED, you can press the POWER button to turn on the monitors. Wi-Fi 1. Press the$ Setup icon to open the Settings Menu. 2. Toggle the WIFI to "ON". 3.
PAGE 41
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) Document #730148 Color Applicability/ Trim Level: Component Description SB10MD1, SB10M1 Monitors L Connector Cable T-Junction Cable IR Headphone Metal Shaft Bracket, Black Metal Stent Briquetting, Black Plastic Stent, Black Bracket Cover, Black Screw Cap Nylon Tie Screw Pack SB10UHD Owner’s Manual Installation Manual Voxx Registration Card SB10UHD Owner’s Manual Accessory Color Kit Contents: Item # Qty.
PAGE 42
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) A. Pre-Installation Precaution Figure B1a 1. Use Seat and Floor protectors to avoid damage to surfaces. Disconnecting the battery prior to any ground or harness removal/ tapping to prevent possible vehicle damage is recommended. The battery may be temporarily reconnected and disconnected throughout the installation process to perform various tasks.
PAGE 43
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) C. Seat Harness Routing Figure C1a 1. Insert a NRT carefully between the guide sleeve and seat material creating a gap between. The NRT will then slide down between the foam and the frame. Once down, twist the NRT to create a larger gap. NOTE: In some seats you may Figure C1b have to remove the guide sleeve to properly slide the NRT between the foam and frame. (Figure C1a-c) Figure C1c 2.
PAGE 44
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) 3. Pull harness until approximately 12” of cable Figure C3a remains at the top of the seat. Slide cable along inside edge of guide sleeve. This will keep harness from being exposed under the bracket. (Figure C3a-b) Figure C3b D. Monitor and Bracket assembly Figure D1a 1. Lay Monitor face down on a soft surface. Notice the 3 locating dimples to align bracket. (Figure D1a-b) Figure D1b 2.
PAGE 45
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) Figure D2b 3. Install 6 screws into bracket and monitor Figure D3a securing the assembly. (Figure D3a-c) Figure D3b Figure D3c 4. Once bracket is secure to the monitor, install Figure D4 bracket cover. (Figure D4) © 2018 Voxx Automotive, Inc. All rights reserved.
PAGE 46
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) E. Mounting Monitor/ Bracket Assembly Figure E1 1. Attach L Connector Harness to the rear of the monitor. (Figure E1) 2. To properly secure the harness to the monitor, Figure E2a first attach a wire tie to the eyelet next to the connection. Install harness connector and secure with the wire tie. Cut excess wire tie before installing monitor. Figure E2b (Figure E2a-c) Figure E2c 3.
PAGE 47
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) Figure E3b 4. While holding both brackets together install 5 flat Figure E4a washers and 5 flat nuts. Tighten all nuts to secure bracket underneath the guidepost. (Figure E4a-b) Figure E4b 4. Install Plastic spacer with 5 flat washers and 5 Figure E4 lock nuts. Tighten all nuts to secure spacer over the guidepost. NOTE: spacer may not sit flush due to the different shape and size of the Guidepost heads.
PAGE 48
UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount) 6. Re-install headrest. NOTE: Some slight Figure E6 modification may be done to the bracket cover to allow headrest to move up and down freely. (Figure E6) 7. Continue routing harnesses following factory harnesses from the lower seat to a central location in the vehicle. Attach to T-Junction harness. F. Power/Ground Location 1.
PAGE 49
Unlimited DOWNLOAD YOUR FAVORITE APPS, PLAY YOUR DVD COLLECTION AND CONTROL THE SEAT-BACK SYSTEM FROM ANYWHERE IN THE VEHICLE. NOTE: ANDROID OS INCLUDES GOOGLE PLAY APP STORE TO DOWNLOAD AND ACCESS ALL APPS ON THE SYSTEM. ALL APPS SHOWN ARE TRADEMARKS OR REGISTERED TRADEMARKS OF THEIR RESPECTIVE OWNER. AVXSB10UHD2 DUAL 10.1” SEAT-BACK ENTERTAINMENT SYSTEM DUAL ANDROID, DVD, HDMI, SD, USB, AND TOUCH SCREEN INTERFACE • • • • • 10.1” Digital LCD Display (1024 x 600) Capacitive Multi-Touch Panel Android 8.
PAGE 50
Thank you for purchasing an Voxx Electronics product. We pride ourselves on the quality and reliability of all our electronic products but if you ever need service or have a question, our customer service staff stands ready to help. Contact us at www.voxxelectronics.com t/ PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act YQZ REGISTER ONLINE AT: www.voxxelectronics.
PAGE 51
ENREGISTREMENT DU PRODUIT ENREGISREGISTRO DEL PRODUCTOTREMENT DU PRODUIT Merci d'avolr achet6 un prodult Voxx 61ectronlques. Nous sommes tiers de la qualH6 et de la fiabi1H6 de tous nos prodults 61ectronlques, mals en cas de n6cessH6 de r6paration ou pour toute question, le personnel de notre samce cllenttle est prit Avous alder. Contactez-nous sur www.voxxelectronlcs.com Graclas por comprar un producto Voxx electr6nlcos.
PAGE 52
RETAILER[INSTALLER NOTICE This system includes a Quick Start Guide (QSG). Please ensure that the QSG is provided to the Consumer of this system. The QSG references the URL link or QR code where a Consumer may access and download the full Operation Manual. Owner's Manual: www.voxxintl.com[seatback0M2 The Installation Manual for this system is also available for download at the below URL link or QR code. Installation Manual: www.voxxintl.