Owner`s manual

- 10 -
Installation
VIDEO IN
Audio/Video cable (supplied)
Rear of the unit
Monitor
AUDIO
IN
VIDEO RIGHT
LEFT
AUDIO
LINE OUTPUT Jacks (Audio and Video)
Audio and video connections to a
monitor can be done with RCA-type video
connections.
1. Turn o the power to the Blu-ray player
and the monitor(s) before making any
connections.
2. Connect the LINE OUTPUT jacks on the
rear of the unit to the AUDIO/VIDEO IN
jacks on your monitor using an audio/
video cable (supplied).
Match the color-coded plugs to the
appropriate jacks: Yellow (video) to
Yellow, White (left audio) to White, and
Red (right audio) to Red.
Notes
• If one of the devices is not working,
check that all the cables have been
inserted properly into the jacks.
• If your component has only one input
for audio (mono), connect it to the
left (white L/Mono) audio jack on the
monitor and don’t connect the right
audio part of the cable.
Notes
• Refer to the owner’s manual of the
connected monitor as well.
• HDMI, the HDMI logo and High-
Denition Multimedia Interface are
trademarks or registered trademarks of
HDMI licensing LLC.
• If your monitor is a high denition
monitor with an HDMI input, we highly
recommend you use the player’s HDMI
output to get the highest possible video
resolution.
Monitor
To HDMI
input
To HDMI
output
HDMI cable
(not supplied
)
Rear of
the unit
Connecting to Your Monitor
HDMI Jack
Audio and video connections to a monitor
can be done with a HDMI cable (not
supplied) if your monitor has a HDMI input.
1. Turn o the power to the Blu-ray player
and the monitor(s) before making any
connections.
2. Connect the HDMI OUT jack on the
rear of the unit to the HDMI IN jack on
your monitor using a HDMI cable (not
included).
3. Select the resolution of the player’s
HDMI output signals to match your
monitor’s resolution capabilities. See the
instructions on page 35 for details.