Accessories User Manual

Take caution in removing adaptor from Kit. Do not twist-off,
If the handle is fixed with a screw, use it to fix the adaptor
0
INSERT GEAR SLEEVE
INTO THE TRANSMISSION
KIT NO. 4
Geared sleeve to be inserted towards inside of vehicle
A) Insertion from the red marked side.
B) Insertion from the opposite side of the red mark.
Gear conversion
A) Wrong: too long.
B) Wrong: too short.
C) Right: length of geared sleeve and pivot are the same.
If a standard is not available for your car, gear H = 37 should be used after cutting it to
match regulator pivot.