Owner's Manual

52
PARTS REQUIRED FOR INSTALLATION OF : CODE SYSTEMS
Telematics device HRN-MCAR-01
CASECRS, CARS, CA4555,
CA4055 or CA5055
HRN-DRS-02
STEP 1. CONFIGURE THE REMOTE STARTER
The Voxx VEPROG is required to upgrade the latest Firmware and properly configure the Code Alarm
CASECRS, CARS, CA4555, CA4055 or CA5055 remote starter to accept the telematics device. When
updating the Code Alarm CASECRS, CARS, CA4555, CA4055 or CA5055 remote starter, please ensure to
choose the correct Protocol option from Programming Bank 2, Feature #9, Option 3 or 4 “ADS TEL”.
STEP 2. CONNECT
(+) HORN (PULSE)
OR
(+) SIREN (CONSTANT)
ANALOG INPUT SIGNAL
FOR ALARM DETECTION
(+) 12V BATTERY
(1)
GROUND
(1)
+12V Battery (RED)
Ground (BLACK)
Data (WHITE)
Data (BLUE)
Alarm(+) (YELLOW)
Installation:
Place module 3 inches
(minimum) from any metal surface
Orientation: Horizontal; small door
facing upward (as seen in this diagram)
OR
3
HRN-DRS-02
(1) Connect to supply power to telematics device
INSTALLATION, WIRING & PROGRAMMING GUIDE