Owner's Manual

46
PARTS REQUIRED FOR INSTALLATION OF : PRESTIGE (E) Models
Telematics device HRN-MCAR-01 (E) Model HRN-DRS-02
STEP 1. CONFIGURE THE REMOTE STARTER
The Voxx VEPROG is required to upgrade the latest Firmware and properly configure the Prestige (E)
remote starter to accept the telematics device. When updating the Prestige (E) remote starter, please
ensure to choose the correct Protocol option from Programming Bank 2, Feature #18, Option 3 or 4 “ADS
TEL”.
STEP 2. CONNECT
3
(+) HORN (PULSE)
OR
(+) SIREN (CONSTANT)
ANALOG INPUT SIGNAL
FOR ALARM DETECTION
(+) 12V BATTERY
(1)
GROUND
(1)
+12V Battery (RED)
Ground (BLACK)
Data (WHITE)
Data (BLUE)
Alarm(+) (YELLOW)
Installation:
Place module 3 inches
(minimum) from any metal surface
Orientation: Horizontal; small door
facing upward (as seen in this diagram)
OR
PRO9776E
HRN-DRS-02
(1) Connect to supply power to telematics device
INSTALLATION, WIRING & PROGRAMMING GUIDE