Owner's Manual

42
PARTS REQUIRED FOR INSTALLATION OF : FORTIN EVO-ALL
Telematics device HRN-MCAR-01 EVO-ALL HRN-LLRS-01
STEP 1. CONFIGURE THE REMOTE STARTER
The Fortin Flashlink is required to properly configure the EVO-ALL remote starter to accept the telematics
device. When flashing the EVO-ALL remote starter, please ensure to choose the following options:
- C1 - OEM Remote starter
- D1 - 3x Lock start
- H2 - Fortin 2
STEP 2. CONNECT
(1) Connect only when remote starter is not supplying power to telematics device
3
(+) HORN (PULSE)
OR
(+) SIREN (CONSTANT)
ANALOG INPUT SIGNAL
FOR ALARM DETECTION
(+) 12V BATTERY
(1)
GROUND
(1)
+12V Battery (RED)
Ground (BLACK)
Data (WHITE)
Data (BLUE)
Alarm(+) (YELLOW)
Installation:
Place module 3 inches
(minimum) from any metal surface
Orientation: Horizontal; small door
facing upward (as seen in this diagram)
HRN-LLRS-01
INSTALLATION, WIRING & PROGRAMMING GUIDE