Owner's Manual

ManualsBrandsAudiovox ManualsGPS & car accessoriesCode Alarm ASCL6 CarLink™

EN-20190222-A

This system must be installed by a professional.

NOTICE

The manufacturer will accept no responsability for any electrical damage resulng from

improper installaon of this product, be that either damage to the vehicle itself or to the

installed device. This device must be installed by a cered technician. Please review the

Installaon Guide carefully before beginning any work.

COMPLETE INSTALLATION & PROGRAMMING GUIDE

Telematics Communicator System

Summary of content (73 pages)

PAGE 1
COMPLETE INSTALLATION & PROGRAMMING GUIDE Telematics Communicator System This system must be installed by a professional. NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
PAGE 2
TABLE OF CONTENTS HARDWARE PARTS................................................................................................................................. 3 iDATASTART HCx...................................................................................................................................... 4 iDATASTART VWx..................................................................................................................................... 6 iDATASTART BM or BZ............................
PAGE 3
HARDWARE PARTS CREATE AN ACCOUNT Before begining the installation and setting the configurations of a CL6 unit, we strongly recommend downloading the Application from the App store and create a user account. a. Go to the App store (Apple) or Play store (Android) and Search for “CL6”. Download and install the Free Application. b. Launch the newly installed CL6 Application on your smartphone or tablet c. Click “Create an Account” d. Fill in all the required fields e.
PAGE 4
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : iDATASTART HCx Telematics device HRN-MCAR-01 iDatastart HCx STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the iDatastart HCx remote starter to accept the telematic device. When flashing the iDatastart HCx remote starter, please ensure to turn ON the Telematics option from the telematics section and choose “MyCar”. STEP 2.
PAGE 5
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 6
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : iDATASTART VWx Telematics device HRN-MCAR-01 iDatastart VWx STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the iDatastart VWx remote starter to accept the telematic device. When flashing the iDatastart VWx remote starter, please ensure to turn ON the Telematics option from the telematics section and choose “MyCar”. STEP 2.
PAGE 7
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 8
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : iDATASTART BM or BZ Telematics device HRN-MCAR-01 iDatastart BM or BZ STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the iDatastart BM or BZ remote starter to accept the telematic device. When flashing the iDatastart BM or BZ remote starter, please ensure to choose the “MyCar” telematics protocol. STEP 2.
PAGE 9
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 10
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : AKX or OEM Telematics device HRN-MCAR-01 AKX or OEM STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the AKX or OEM remote starter to accept the telematic device. When flashing the AKX or OEM remote starter, please ensure to choose the “MyCar” telematics protocol. STEP 2.
PAGE 11
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 12
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : ADS-AL-CA / OL-MDB-ALL Telematics device HRN-MCAR-01 ADS-AL-CA / OL-MDB-ALL FLCL6HAR, OL-HRN-LINKR-ALL (sold Separately) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the ADS-AL-CA or OL-MDB-ALL remote starter to accept the MyCar telematics device. When flashing the ADS-AL-CA or OL-MDB-ALL remote starter, please ensure to choose the “MyCar” telematics protocol. STEP 2.
PAGE 13
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 14
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : FLASHLOGIC FL-CAN Telematics device HRN-MCAR-01 Flashlogic FL-CAN FLCL6HAR (sold Separately) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Flashlogic FL-CAN remote starter to accept the MyCar telematics device. When flashing the Flashlogic FL-CAN remote starter, please ensure to choose the “ASCL6” telematics protocol. STEP 2.
PAGE 15
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 16
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : CRIMESTOPPER Telematics device HRN-MCAR-01 CrimeStopper HRN-LLRS-01 Compatible models: RS-00, RSx-G5, SP402, SP502 STEP 1. CONFIGURE THE REMOTE STARTER The CrimeStopper remote starter must be configured to accept the telematics device. When programming the CrimeStopper remote starter, please ensure to select the option indicated “Smart Phone Baud Rate”. This option MUST BE SET TO 9600baud.
PAGE 17
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 18
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : FLASHLOGIC FLRS Telematics device HRN-MCAR-01 Flashlogic FLRS STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Flashlogic FLRS remote starter to accept the telematic device. When flashing the Flashlogic FLRS remote starter, please ensure to choose the “ASCL6” telematics protocol. STEP 2.
PAGE 19
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 20
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : FLASHLOGIC FLRSBA Telematics device HRN-MCAR-01 Flashlogic FLRSBA STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Flashlogic FLRSBA remote starter to accept the telematic device. When flashing the Flashogic FLRSBA remote starter, please ensure to turn ON the Telematics option from the telematics section and choose “Carlink”. STEP 2.
PAGE 21
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 22
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : FLASHLOGIC FLCMVW Telematics device HRN-MCAR-01 Flashlogic FLCMVW STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Flashlogic FLCMVW remote starter to accept the telematic device. When flashing the Flashlogic FLCMVW remote starter, please ensure to turn ON the Telematics option from the telematics section and choose “Carlink”. STEP 2.
PAGE 23
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 24
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : Telematics device HRN-MCAR-01 COMPUSTAR CM7000 / CM7200 / POLARSTART PRS-16 CM7000 / CM7200 / PRS-16 BLADE-AL (64) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Compustar or Polarstart remote starter to accept the telematic device.
PAGE 25
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 26
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : COMPUSTAR CM6200 Telematics device HRN-MCAR-01 Compustar CM6200 BLADE-AL (64) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Compustar remote starter to accept the telematic device. When flashing the Compustar remote starter, please ensure the remote starter firmware and BLADE-AL (64) firmwares are updated to the latest firmware available. STEP 2.
PAGE 27
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 28
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : COMPUSTAR DC2 Telematics device HRN-MCAR-01 Compustar DC2 STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Compustar DC2 remote starter to accept the telematic device. When flashing the Compustar DC2 remote starter, please ensure to turn ON the Telematics option from the telematics section and choose “Drone Mobile”. STEP 2.
PAGE 29
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 30
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : COMPUSTAR DC3 Telematics device HRN-MCAR-01 Compustar DC3 STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Compustar DC3 remote starter to accept the telematic device. When flashing the Compustar DC3 remote starter, please ensure to turn ON the Telematics option from the telematics section and choose “Drone Mobile”. STEP 2.
PAGE 31
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 32
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : POLARSTART PRS-13 Telematics device HRN-MCAR-01 PRS-13 BLADE-AL (64) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Polarstart PRS-13 remote starter to accept the telematic device. When flashing the Polarstart PRS-13 remote starter, please ensure the remote starter firmware and BLADE-AL (64) firmwares are updated to the latest firmware available.
PAGE 33
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 34
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : DIRECTED DBALL 2 Telematics device HRN-MCAR-01 DBALL2 HRN-DRS-01 or HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Directed XKloader 2 or 3 is required to properly configure the DBALL2 remote starter to accept the telematic device. When flashing the DBALL2 remote starter, please ensure to choose the “Smartstart” telematic protocol. STEP 2.
PAGE 35
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 36
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : DIRECTED DB3 Telematics device HRN-MCAR-01 DB3 HRN-DRS-01 or HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Directed XKloader 2 or 3 is required to properly configure the DB3 remote starter to accept the telematic device. When flashing the DB3 remote starter, please ensure to choose the “Smartstart” telematic protocol. STEP 2.
PAGE 37
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 38
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : DIRECTED 4X10 - 5X10 - AFD600 - ASD200 - ASD-600 Telematics device HRN-MCAR-01 4X10 - 5X10 - AF-D600 ASD200 - ASD600 HRN-DRS-01 or HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Directed XKloader 2 or 3 is required to properly configure the 4X10 - 5X10 - AF-D600 - ASD200 - ASD600 remote starter to accept the telematic device.
PAGE 39
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 40
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : DIRECTED DS4 - DS4+ Telematics device HRN-MCAR-01 DS4 / DS4+ HRN-DRS-01 or HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Directed XKloader 2 or 3 is required to properly configure the DS4 / DS4+ remote starter to accept the telematic device. When flashing the DS4 / DS4+ remote starter, please ensure to choose the “Smartstart” telematic protocol. STEP 2.
PAGE 41
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 42
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : FORTIN EVO-ALL Telematics device HRN-MCAR-01 EVO-ALL HRN-LLRS-01 STEP 1. CONFIGURE THE REMOTE STARTER The Fortin Flashlink is required to properly configure the EVO-ALL remote starter to accept the telematics device. When flashing the EVO-ALL remote starter, please ensure to choose the following options: - C1 - OEM Remote starter - D1 - 3x Lock start - H2 - Fortin 2 STEP 2.
PAGE 43
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 44
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : FORTIN EVO-ONE Telematics device HRN-MCAR-01 EVO-ONE HRN-LLRS-01 STEP 1. CONFIGURE THE REMOTE STARTER The Fortin Flashlink is required to properly configure the EVO-ONE remote starter to accept the telematic device. When flashing the EVO-ONE remote starter, please ensure to choose the following options: Toggle your Flashlink connection mode to “Remote-Starter”.
PAGE 45
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 46
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : PRESTIGE (E) Models Telematics device HRN-MCAR-01 (E) Model HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Voxx VEPROG is required to upgrade the latest Firmware and properly configure the Prestige (E) remote starter to accept the telematics device. When updating the Prestige (E) remote starter, please ensure to choose the correct Protocol option from Programming Bank 2, Feature #18, Option 3 or 4 “ADS TEL”. STEP 2.
PAGE 47
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 48
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : PRESTIGE (Z) Models Telematics device HRN-MCAR-01 (Z) Model STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Prestige (Z) remote starter to accept the telematic device. When flashing the Prestige (Z) remote starter, please ensure to choose the correct Protocol option from Programming Bank 2, Data Port Protocol, “ADS”. STEP 2.
PAGE 49
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 50
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : PURSUIT (E) Models Telematics device HRN-MCAR-01 (E) Model (Exc.PRO9233E) HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Voxx VEPROG is required to upgrade the latest Firmware and properly configure the Pursuit (E) remote starter to accept the telematics device. When updating the Pursuit (E) remote starter, please ensure to choose the correct Protocol option from Programming Bank 2, Feature #18, Option 3 or 4 “ADS TEL”.
PAGE 51
INSTALLATION, WIRING & PROGRAMMING GUIDE Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 52
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : CODE SYSTEMS Telematics device HRN-MCAR-01 CASECRS, CARS, CA4555, CA4055 or CA5055 HRN-DRS-02 STEP 1. CONFIGURE THE REMOTE STARTER The Voxx VEPROG is required to upgrade the latest Firmware and properly configure the Code Alarm CASECRS, CARS, CA4555, CA4055 or CA5055 remote starter to accept the telematics device.
PAGE 53
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 54
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : OLDER CODE SYSTEMS Telematics device HRN-MCAR-01 OLDER CODE SYSTEMS HRN-DRS-02 IMPORTANT NOTE: THESE OLDER MODELS ARE NOT SUPPORTED BY THIS PRODUCT.
PAGE 55
INSTALLATION, WIRING & PROGRAMMING GUIDE
PAGE 56
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : OMEGA RS-X70 Telematics device HRN-MCAR-01 HRN-DRS-02 & HRN-LLRS-01 RS-X70 BLADE-AL (64) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Omega RS-X70 remote starter to accept the telematics device. When flashing the Omega RS-X70 remote starter, please ensure the remote starter firmware and BLADE-AL (64) firmwares are updated to the latest firmware available.
PAGE 57
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 58
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : OMEGA AL-XX70-B Telematics device HRN-MCAR-01 HRN-DRS-02 & HRN-LLRS-01 AL-XX70-B BLADE-AL (64) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the Omega AL-XX70-B remote starter to accept the telematics device. When flashing the Omega AL-XX70-B remote starter, please ensure the remote starter firmware and BLADE-AL (64) firmwares are updated to the latest firmware available.
PAGE 59
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 60
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : DSE 503AIR 5R-85 Telematics device HRN-MCAR-01 DSE 503AIR 5R85 STEP 1. CONFIGURE THE REMOTE STARTER The 503Air is already pre-configured to accept the telematics device. No extra programming required. STEP 2.
PAGE 61
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 62
INSTALLATION, WIRING & PROGRAMMING GUIDE PARTS REQUIRED FOR INSTALLATION OF : DSE iSTART2 - 3 Telematics device HRN-MCAR-01 DSE iStart2 - 3 CI3R-86 BLADE-AL (64) STEP 1. CONFIGURE THE REMOTE STARTER The ADS Weblink (ADS-USB) is required to properly configure the DSE iStart2 - iStart3 remote starter to accept the telematics device. When flashing the DSE iStart2 - iStart3 remote starter, please ensure the remote starter firmware and BLADE-AL (64) firmwares are updated to the latest firmware available.
PAGE 63
INSTALLATION, WIRING & PROGRAMMING GUIDE STEP 3. NETWORK CONNECTIVITY Once the telematics module is connected into the remote starter, two LED’s will display to which networks you are connected to. (See LED Status Reference Chart on last page for details). NOTE: The vehicle may need to be outside in an open area in order to connect to a cellular and/or GPS network. STEP 4. ADD A DEVICE/VEHICLE TO AN ACCOUNT a. Click the “+” sign at the bottom right of the Application screen.
PAGE 64
INSTALLATION, WIRING & PROGRAMMING GUIDE LED Status Reference Chart LED Status GREEN LED : Cellular Network RED LED : GPS Network OFF No Cellular Network. No power to device. No GPS Network. No power to device. Flashing Searching/Connecting Searching/Connecting ON Solid Connection is established Connection is established RESET PROCEDURE 1 - Disconnect the main harness from the MyCar device. 2 - Wait approximately 10 seconds and reconnect the main harness to the MyCar device.
PAGE 65
INSTALLATION, WIRING & PROGRAMMING GUIDE
PAGE 67
QUICK INSTALLATION GUIDE DOC DATE: 110317 1. CONFIGURE THE REMOTE STARTER a. To configure the remote starter to accept the CL6 telematics device, refer to the Detailed Installation and Programming guide for more details. To access these guides, visit www.CL6.com. Complete the remote starter installation and confirm that it is working properly before connecting the CL6 device. 2. CONNECT a.
PAGE 68
REMOTE STARTER CONNECTION GUIDE DOC DATE: 20161019-A 3 (+) 12V BATTERY REQUIRED Data (WHITE) Data (BLUE) Alarm(+) (YELLOW) +12V Battery (RED) Ground (BLACK) GROUND (+) HORN (PULSE) OR (+) SIREN (CONSTANT) ANALOG INPUT SIGNAL FOR ALARM Installation: Place module 3 inches (minimum) from any metal surface HRN-DRS-01 Telematics Port HRN-LLRS-01 Orientation: Horizontal; small door facing upward (as seen in this diagram) CM-7XXX DB ALL2 4X10 - 5X10 CM-6XXX Connects here This system must be installed by
PAGE 69
OWNER’S CARD This button will send a START command to your previously installed remote starter. The vehicles engine will start and run for the preset time. The timer will begin to count down from the preset runtime set by your installer. This button will send a STOP command to your vehicles remote starter. The vehicle’s engine will shut down and the runtime status will change to 00:00:00 once the action has been completed. This button will LOCK and/or ARM your vehicle.
PAGE 70
OWNER’S CARD Thank you for purchasing CL6 Product Sticker Here Step 1: App & Account Setup 1. Start by downloading the CL6 smartphone app. 2. Once completed, Launch the CL6 app on your device. 3. Click the “Create an Account” and fill in all of the required fields then click the “Create your Account”. 4. Open your email and look for a new email from “MYCARCONTROLS” 5. To activate your account and create your password, click on the link in the email. 6.
PAGE 71
ATTENTION If installing the Carlink ASCL6 with any one of the VOXX Brands (Prestige, Pursuit, Or Code Alarm) the Alarm/Remote start module must be updated to the latest firmware version. This will require the VOXX USB updating cable, Part# VEPROG. Prestige/Pursuit: Please visit www.veprog.com to update to the latest firmware version. Code Alarm: Please visit www.voxxuniversity.com to download the CA Utility APP. The APP can be found in the VOXXTECH section of the website.
PAGE 72
• ADD-ON SMART CONTROL APP
PAGE 73
SMART CONTROLAPP FEATURES - Remote Start I Keyless Entry - Door Lock I Unlock • ·- \ - Door Lock Status - Battery Voltage Status - Vehicle Locator I GPS - First Year Service Included Caracteristicas de Ia aplicacion - Arranque remota I entrada sin llave - Puerta bloqueo I desbloqueo - Estatus de puertas bloqueo - Estatus de voltaje de Ia bateria - Vehfculo localizador I GPS - Primer aiio de servicio incluy6 Requires purchase of separate remote start module. Visit Carlink6.com for compatible models.