User manual

Se t t I n g up
5
Attaching the legs
for table placement
1. Position one of the legs over one of
the recessed areas on the back of the
AR5100 as shown.
2. Insert the leg into the recessed area
and press upward to lock it in place.
3. Repeat with the other leg.
The AR5100 is ready to place upright on
a at surface.
Once you’ve found where you’d like to put the AR5100,
you have two placement options:
Stand it up:
The AR5100 comes with removable legs for upright placement on a
at surface. Simply attach the legs to the back of the AR5100 to leave
the unit in this position (see below for details).
Hang it on the wall:
The AR5100 package comes with screws and anchors for mounting
the unit on drywall. The back of the AR5100 has two mounting holes
that t over these screws (see below for details).