User manual
ad d I t I o n a l In f o r m a t I o n
12
Troubleshooting
The following troubleshooting guide takes you through some of
the more common problems associated with the installation and/or
operation of a docking system for iPod. If the problem persists, please
call toll-free at 1-800-732-6866 or visit www.araccessories.com.
iPod Does Not Connect to
Speaker System
• Remove iPod from the dock and conrm that
you are using the appropriate insert for the
model of iPod you have.
• Detach the iPod from the AR5100 and check for
any obstructing debris.
• Reinsert iPod into docking port and establish a
secure connection.
No Sound Is Produced • Inspect wall outlet and ensure that the power
cord is rmly plugged into the outlet.
• If you’re trying to listen to an auxiliary audio
source, make sure the audio cables are securely
connected to the source and to the AR5100.
• Make sure the AR5100 is turned on. Press the
power button on the AR5100 front panel if the
front panel is not illuminated.
• Select and play the desired music you wish to
play.
• Make sure that the volume is turned up.
• If there still is no sound, remove the iPod from
the docking port, turn the AR5100 off, unplug
the unit from the wall outlet, wait one to two
minutes, and then plug the power cord back into
the wall outlet, turn the AR5100 back on, put
your iPod into the dock, and try the above steps
again.