Owner's Manual
Table Of Contents
- Owner's Manual
- Table of Contents
- Congratulations
- Safety Precaution
- Warnings
- System Features
- Accessories
- Monitor Features (SB10MD1)
- Monitor Features (SB10M1)
- Getting Started
- Home Main Menu
- System Applications
- SmartStream Android
- SmartStream iOS
- HDMI Port Information
- USB & SD Card Playback
- Wi-Fi Dual Screen
- Dual Screen
- Wi-Fi Setup
- VOXX LINK
- WFMM
- IR Headphone Transmitter
- Language
- About Device - Check for Update
- Device Name & Accounts
- Time Zone & Reset
- Volume & Brightness Control
- DVD Playback (SB10MD1)
- Media Type and File Type Compatibility
- Troubleshooting
- General Specifications
- Compliance Information
- Quick Start Guide
- Product Registration
FIRST TIME SETUP
Powering up the System
1. When vehicle power is applied to the system, the POWER and HOME buttons on each
monitor will flash RED/BLUE for approximately 12 to 15 seconds and then the buttons
will remain solid RED. This is normal and a notification that the system is booting up.
Once the POWER and HOME buttons are solid RED, you can press the POWER
button to turn
on
the monitors.
Wi-Fi
1. Press the (i) Setup icon to open the Settings Menu.
2. Toggle the WIFI to
"ON".
3. Press WIFI to show available networks.
4. Select the WIFI network you would like to connect to and use the touchscreen key-
board to enter the password.
5.
Press the green check mark to connect. The system will remember and automatically
reconnect
to
any saved available networks (maximum
of
10).
Wireless Headphones
1.
To
use the wireless headphones, press the (i) Setup icon to open the settings menu.
2.
Select "IR TRANSMITTER" and toggle the switch to "ON".
3. Select "CHANNEL A"
or
"CHANNEL B" on each monitor.
4. Set the switch on your wireless headphones to "A"
or
"B" to listen
to
that monitor.
Downloading Apps on the System Monitors
1. Select the !!! apps icon from the main menu.
2. Open the "Play Store" application, preloaded on the system.
You
will need to create or
sign in with your Google account.
3. Browse the Google Play Store and download the applications you wish to the system
monitors.
Voxx Link
1. Go to the Google Play Store
or
iTunes Store and download the free Voxx Link
application for your Smart Device.
Your Smart Device must be connected to the same WIFI network as the System
Monitors for the Voxx Link app to function.
2. Press the (i) Setup icon to open the settings menu.
3.
Select "VOXX LINK" from the menu on the left. This will enable the feature.
4. Open the application on your mobile device and select the monitor you wish to control
(example: SB10MD2_xxx). Once selected, the Monitor's screen will display on your
mobile device, allowing full control
of
the Monitor.
NOTE:
This Voxx Link application is designed to
allow
a remote
user
(ie. Parent) that does
not
have direct visibility to each monitors to control each monitor.
Scan the QR Codes below
to
download the Voxx Link application.
iTunes Store Google Play Store
4