Owner's Manual

GENT EX
ONLY FOR MIRRORS WITH COMPASS
1. Adjust compass zone after mirror installation.
a) The zone setting is factory preset to Zone 8. Refer to Compass
Calibration Zone Map to find correct compass zone setting for your
geographical location.
b) To change the zone setting, push and hold the button for
approximately 9 seconds until a number appears in the display.
c) Press button repeatedly until desired compass zone number is
reached.
2. Calibrate compass.
a) Drive to an open, level area, away from large metallic objects or
structures.
b) Hold the button for approximately 12 seconds until "CAL" or "C" text
appears
in the display. Release the button to enter the calibration
mode.
c) Drive slowly in up to 3 circles until the "CAL" or "C" text disappears,
and a directional heading is displayed.
The compass is now calibrated.
GENTEX