Specifications

Chassis specifications – continued
• AM/FM radio, four speakers, rooftop antenna
• Alternator – ambulance prep package with dual alternators (320 amps)
Chassis modifications:
• Label installed in cab indicating seating capacity of two (2) persons with a weight allowance of 250 lbs.
per person
• Data plaque, installed on inside of driver’s door with required information based on the components of
the apparatus applicable to the 2009 NFPA #1901 standards:
 Engine oil
 Engine coolant
 Transmission fluid
 Drive axle lubricant
 Power steering fluid
 Pump, generator or other component lubricants
 Other NFPA applicable fluid levels as required
 Paint manufacturer, type and color number
• Dimension data label indicating the overall height, length, width and weight of the vehicle shall be
installed on the cab dash area
• Warning label stating “NO RIDING ON REAR OF APPARATUS” shall be applied to the vehicle at the
rear step area. Label shall indicate that riding in or on these areas while vehicle is in motion is
prohibited.
• Cab door shall have NFPA #1901 compliant reflective red and amber panels installed
• Chassis cab shall be fitted with dual Nerf bars constructed of 304 stainless steel. Nerf bars shall serve
as lower cab door impact protection stepping surfaces for the operators
Body component specifications:
• Body and mounting members shall be constructed as a singular body assembly
• Entire body shall be constructed, assembled and painted as a stand-alone structure separate from the
chassis. Structure shall utilize the strength of the chassis frame rails to support the body without
requiring the structure to physically sit on the upper frame rail flange
• Body construction shall be a single unit of body and compartments and mounting members. Body shall
be capable of being set on its top or sides without permanent deflection or damage to the body
components.
• Complete body and mounting members shall be removable as a single unit. The body shall have been
produced for use as fire apparatus for a minimum of twenty (20) years.
• Entire assembly shall be constructed of a high strength composite with reinforced fiber and resin
construction. Exterior surface shall present a smooth glass-like appearance with a painted automotive
surface