Specifications

Lettering and Striping:
All lettering and striping shall be approved by the County prior
to application to the vehicle.
• Gold leaf lettering, bordered in black and enclosed in clear mylar shall be placed on the cab and the
body as directed by the County. A total quantity of fifty (50) 4” letters will be needed
• Reflective striping shall be provided for the front and sides of the vehicle. The striping shall be 5” x 1”
wide 3M brand Scotchlite reflective multi-stripe. There shall be a 1” gap between each of the stripes.
The striping shall be placed up to 60” above ground level and shall conform to 2009 NFPA #1901
reflectivity requirements. The reflective striping shall be applied to a minimum of 50% of the perimeter
length on each side and 50% of the perimeter width of the front of the vehicle.
• The outer rear panels of the body shall have Reflexite® brand 6” wide reflective red and amber striping
installed over 100% of available area. The Chevron style stripe shall be applied at a 45° angle pointing
towards the center upper portion of the rear panel.
NFPA and DOT Required Highway Safety Equipment:
• The apparatus shall be equipped with a NFPA and DOT required highway safety kit as follows:
 One (1) set of three (3) dual faced triangular warning flares with foldaway bases and storage cases
 One (1) 2.5# ABC dry chemical fire extinguisher with vehicle mounting bracket
 Six (6) 24” high reflective traffic cones
Miscellaneous Additional Items:
• Two (2) rubber wheel chocks provided on the apparatus and two (2) wheel chock mounting brackets
installed under the body
• One (1) 24-unit first aid kit shall be provided
• One (1) Audiovox ACA 200W, or equivalent, rear vision color camera system. The system shall include
a camera and color screen, wired to activate with the back-up circuit