Specifications

Air system – continued:
 Storage systems
 Fill stations
• Reference Outline Dimension Drawing:
 Provided for:
9 H13-G-ASY 0558
9 H13-D-ASY 0937
• DOT Air Cylinders:
 Four (4) DOT 6000 psi air cylinders shall be installed and piped to the air system. Cylinders shall
be 509 cu. ft. DOT, 70” L x 9.5” diameter
• Horizontal Mounting Air Storage:
 Nine (9) air pressure cylinders shall be securely mounted in a specified compartment in a steel
mounting rack with an adjustable tightening system
 Cylinders shall not be subject to damage, wear or vibration
• High Pressure Breathing Air Reels:
 Hannay 1500 Series, or equivalent, 12 volt electric rewind high pressure air hose shall be installed.
Reel color: red. Reel location:
9 12 volt rewind electrical supply shall be wired directly from the chassis battery system with
heavy duty stranded copper cable with guarded finger type rewind button. The piping to the air
reel system shall be through high pressure, 6000 psi hose with threaded couplings from air
storage system
 Air control panel shall have the following:
9 One (1) quarter turn shut-off valve to isolate air reel
9 One (1) 2 ½” diameter upstream pressure gauge
9 One (1) adjustable pressure regulator
9 One (1) 2 ½” diameter downstream pressure gauge
9 One (1) check valve in supply line
9 Label indicating high pressure breathing air and pressure range
 200’ length high pressure (5000 psi rating) breathing air hose with quick connect fittings shall be
provided on the air reel
 One (1) Hannay four-way style stainless steel roller assembly shall be installed
 Hannay orange ball stop assembly, installed on air hose, shall be provided
•
Rear Trailer Hitch
 One (1) class 3 type trailer hitch, rated at approximately 10,000 lbs. shall be installed at the rear of
the apparatus attached to the body sub-frame assembly
 Hitch shall include frame, receiver insert, slide-in ball mount with a 1 ¾” ball, a 5/8” hitch pin and
6-pin cable
 Wiring shall be provided at the rear of the apparatus. A 12-volt electrical connector shall be wired to
the chassis stop, running and turn lights, and electrical trailer brakes