Specifications

Wheel well panel construction:
• The outer wheel well shall be a minimum wall thickness of 1 ½”
• Exterior wheel well shall be painted to match the body
• Entire wheel well area shall be concealed from compartments with seamless corners in all areas
Fuel fill access:
• An access opening for the fuel fill installation shall be provided in the driver’s side wheel well area. The
fuel filling equipment will be installed by the final stage manufacturer
Left side body compartments:
• Compartment L-1T
 Left side forward compartment. Approximate dimensions: 35 ¼” w x 40 ¼” h x 20” d. Door
opening: 30 ¾” w x 36” h
 Adjustable tracks installed on each side wall
• Compartment L-2
 Left side over wheel well compartment. Approximate dimensions: 43 ¼” w x 20 ¼” h x 20” d.
Door opening: 40 ¼” w x 16” h
 Adjustable tracks installed on each side wall
• Compartment L-3
 Left side rear compartment. Approximate dimensions: 29 ¼” w x 40 ¼” h x 20” d. Door opening:
24 ¾” w x 36” h
 Four (4) adjustable tracks installed, two (2) on each side wall
Right side body compartments:
• Compartment R-1T
 Right side forward compartment. Approximate dimensions: 35 ¼” w x 40 ¼” h x 20” d. Door
opening: 30 ¾” w x 36” h
 Adjustable tracks installed on each side wall
• Compartment R-2
 Right side over wheel well compartment. Approximate interior dimensions: 72.7” w x 20 ¼” h x
20”d. Door opening: 68” w x 16” h
 Adjustable tracks installed on each side wall
• Compartment R-3
 Right side rear compartment. Approximate dimensions: 27” w x 20” h x 20” d. Door opening: 23
½” w x 17” h
 Four (4) adjustable tracks installed, two on each side wall
Rear compartment bed:
• Compartment RR-1
 Rear compartment shall be located above the frame rails: Dimensions: 51” w x 43” h x 104” d. Door
opening: 46” w x 40” h
 Adjustable tracks installed on each side wall