Installation guide

DRIVEN BY DICE ELECTRONICS
Vehicle BUS Connector- A-MBR-1501-AVW R1 Connector
You can access the CD changer connector located on the back of the radio. Unplug the factory connection if
present and plug theA-MBR-1501-AVW
R1 connector into the receptacle. The connector should securely lock.
Ground wire MUST be connected to a stable grounding point.
to ground
Harness provided with your kit
may a contain wires labeled
(+Tel/-
Tel Mute). Please do not
connect those wires.
A-MBR-1501-AVW R1 connector