Installation guide

DRIVEN BY DICE ELECTRONICS
Vehicle BUS Connector - A-MBR-1500-AUD Connector
You can access the CD changer connector located on the back of the radio. Unplug the factory connection if
present and plug the A-MBR-1500-AUD connector into the receptacle. The connector should securely lock.
Ground wire MUST be connected to a stable grounding point.
to factory harness
in vehicle
Harness provided with your kit
may a contain wires labeled
(+Tel/-
Tel Mute). Please do not
connect those wires.
to ground
A-MBR-1500-AUD Connector
to MediaBridge
Interface Module