User Guide

Familiarize yourself with the Installation Instructions and Cruise Control components.
A. Wllen disconnecting connectors, hold connector and ress the lock downward while pulling connectors apart.
(Figure A) CAUTION: Do Not Pull On Wires
",'
,-~IGURE B
B. When connecting mating connectors, push connectors together until locking mechanisms are
fim11y locked together. (Figure B)
If vehicle is equipped with an Anti-Theft Radio, the radio codemusfbe written down prior to
discolmecting battery cable. The code must be reentered when the negative battery cable is reinstalled.
~-
Remove the vehicle's battery terminals before
installing the Cruise Control components
for safety precautions. (Figure C)
Remove Both
Battery
Terminals
:3~!
FIGURE C
.
5 D
l 'rrTnc.c, t ~.
~ .Eema e:;;I~Ian;"\o::JOnnec cor.
, ," ,
When installing Self Stripping Connector,
Follow these four steps. (Figure D)
4) Bend cover
over and snap
shut
1 ) Press existing
vehicle wire into
connector slot
3) Squeeze tab into
COJU1ector with
pliers
2) Insert
harness wire to
stop, must go
past metal tab
FIGURE D
Page 2