LCD TV Operating Manual FPE1705 Before connecting, operating or adjusting this product, please read the manual completely. FOR ASSISTANCE CALL 1-800-619-3848 OR VISIT US AT WWW.AUDIOVOX.
Congratulations on your purchase of this LCD TV. We recommend that you read this manual thoroughly before use to fully enjoy the many functions and excellent features of this unit. Keep this manual in an easily accessible location for future reference. Note:Screen displays and illustrations in this manual may differ from the actual model.
Important Safety Information The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “DANGEROUS VOLTAGE” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing instructions in the literature accompanying the product).
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose this unit in the rain or spatter by liquid. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Important Safety Cautions Important Information Regarding use of Video Games, Computer, captions or other fixed images displays The extended use of a fixed image program material can cause permanent “Shadow Image” on the LCD panel. The background image is viewable on normal programs in the form of stationary fixed images.
Identification of controls Control buttons Control Panel SOURCE MENU Menu Select Input Signal CH CH VOL VOL Power On/ Standby Channel Down/Up Volume Down/Up Speaker Speaker Remote sensor Power Indicator 1. SOURCE The Power Indicator light will glow To access the SOURCE select menu yellow when the set is turned on, 2. MENU and glows red when the set is in Press this button to access the MENU main page. the standby mode. 3. CH +/Change the TV channel.
Identification of controls (continued) Back 1 VGA 3 2 PC - AUDIO Y Pb Pr R AUDIO L PHONE 5 4 VIDEO HDT V IN L AUDIO R AV OUT VIDEO L AUDIO R 6 S-VIDEO 7 RF AV IN 1. VGA input / PC- Audio in Connect to the VGA/audio output 3.5mm jacks on your PC. 2. HDTV input (Y, Pb, Pr, Audio L, R) Connect to the Y/Pb/Pr (or Y/Cb/Cr) and audio output jacks of a Set-Top Box or DVD player. 3. Headphone 3.5mm jack 4. AV outputs (Video, Audio L, R) Connect to the VCR input jacks to record programs. 5.
Remote Control Power on/standby Mute Volume up/down selector; In the menu operation, adjust the selected item Channel up/down selector. In menu operations, used to select item. Access the menu Exit the menu S.
Preparing the Remote Control Please install the batteries before using the remote control. Batteries for the Remote Control If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2 <(Slide the cover while pressing down.) Insert two size-AAA batteries. 3 Replace the cover and slide in reverse until the lock snaps.
Installation Install the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna connections OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED) Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the next page.
Installation Cable (CATV)/satellite connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Installation(continued) Power connection Household power outlet Plug into AC outlet. AC cord bottom view 1. Connecting the female plug to the AC socket on the unit. 2. Connecting the male plug to the wall outlet as illustrated. Note:
Installation(continued) Elevation adjustment You can adjust the angle of the LCD TV as follows. o o The elevation can be adjusted from -5 to +10 average.
Installation(continued) Notes about connection 1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors will result in image or color problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
Installation(continued) The PC input signal connection Connect the VGA(D-sub) input interface on the TV to the output of PC equipment through Min D-sub 15 pin cable as illustrated.For the audio connection,use an audio cord that matches the audio output terminal on the computer. If you select PC signal, please set the input signal source of LCD TV to VGA mode. VGA PC - AUDIO Y Pb Pr R AUDIO L PHONE HDT V IN VIDEO L AUDIO R AV OUT VIDEO L AUDIO R S-VIDEO RF AV IN Audio cable VGA cable (3.
Installation(continued) AV OUT connection VGA PC - AUDIO Y Pb Pr R AUDIO L PHONE VIDEO HDT V IN L AUDIO R AV OUT Y W S-VIDEO L AUDIO R RF AV IN R To video output Y VIDEO To audio outputs Yellow (video) w White (audio, L) R Red (audio, R) To audio inputs To video input Y R W To audio inputs W R VCR for recording ANT OUT (Not Supplied) AV OUT VIDEO L AUDIO R S - VIDEO ANT IN AV IN VIDEO L AUDIO R Audio amplifier (Not Supplied) Rear of the VCR How to connect: Connect t
Installation(continued) YPbPr input connection Please connect the YPbPr input terminals on the TV set for better picture quality. And connect the audio outputs with the corresponding audio input terminals on the TV set. If you select YPbPr signal, please set the input signal source of the LCD TV to YPbPr / YCbCr mode.
Basic Operations Turning on 1 Connect the power correctly, then the red indicator lights up and the unit is in STANDBY mode. 2 Press the POWER ( )button on the remote control or on the unit to turn on the TV set.The indicator LED will turn to yellow. Turning off 1 With the power on, press the POWER ( ) button to turn off the TV and put the TV in STANDBY mode, the indicator LED will turn to red. 2 If you want to turn off the power completely, unplug the power cord from the wall outlet. S.
Main On-Screen-Display (OSD) introduction TV/AV/S-VIDEO MODE YPbPr/YCbCr/VGA MODE Picture Setting Menu brightness 50 contrast 50 color 18 sharpness 32 tint 0 Picture Setting Menu fill all ccd mode settings 50 Picture Position MENU 6 zoom mode 50 contrast customer temp setting on backlight brightness color temp 5000K 7300K 9300K user System Setting Menu blue screen 1 Press MENU button to display menu screen. 2 Press VOL+/- to select the menu. 3 Press CH6 to access the menu.
Operations Picture adjustment S.M 1 Access Picture Setting menu by pressing MENU. 2 Press CH5/6to select the item that you want to adjust. 3 Press VOL+/- to adjust selected item. Item brightness contrast color sharpness 50 50 19 32 0 Function Range To adjust picture's brightness To adjust picture's contrast To adjust picture's color To adjust picture's sharpness To adjust picture's tint tint brightness contrast color sharpness tint You can select picture mode by P.M button.
Operations (continued) System setting blue screen setting 耋晤憮 blue screen 1 Access the System Setting menu. on 6 backlight zoom mode fill all ccd mode settings CC 1 ---V-chip settings 2 Press CH5/6to select blue screen item. 3 Press VOL+/- to select off or on. If you select on, the screen displays blue background when there is no signal. If you select off, the screen displays static when there is no signal.
Operations (continued) System setting Setting Closed Caption(CCD) 1 Access the System Setting menu. blue screen on backlight 2 Press CH5/6 to select ccd mode settings item. 3 6 zoom mode fill all ccd mode settings CC 1 V-chip settings ---- Press VOL+/- to select . You can select the caption data channel (CC1, CC2, CC3, CC4), the text service channel(text1, text2, text3, text4) or turn off the Closed Caption(Off). S.M Note: 1.
Operations (continued) System setting (V-Chip Sub-menu) Movie Blocking setting This function allows programs to be restricted and TV usage to be controlled based on program rating. It prevents children from watching violent or sexual scenes that may be harmful. Please enter the V-chip sub-menu (previous page). 1 Press CH5/6button to select movie blocking item. 2 Press VOL+/- button to select desired rating. S.
V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable,and Emergency System signals ), then denies access to programming if the program's rating meets the limitations you select. In this case, the program will be blocked. Content based Please enter the V-chip sub-menu first . 1 Press CH5/6button to select TV blocking setting... item.
Operations (continued) System setting (V-Chip Sub-menu) Canadian French blocking setting Please enter the V-chip sub-menu first . 1 Press CH 5/6 button to select Canadian French blocking item. Vchip global setting movie blocking 2 Press VOL+/- button to select desired rating enable G TV blocking Y Canadian English blocking E Canadian French blocking E TV block setting... change password **** Vchip global setting enable G Canadian French Language Ratings: * E: Exempt. * G: Children.
Operations (continued) Audio Setting Selecting the MTS 1 2 3 Access the Audio Setting menu. Press CH5/6 to select MTS item. Press VOL+/- to select mono, stereo or SAP(secondary audio program). SRS MTS bass treble balance on off mono stereo SAP 0 0 0 You can also directly press STEREO button on the remote control to select the MTS. The MTS mode changes as follows: S.
Operations (continued) Audio Setting Adjusting the bass/treble 1 Access the Audio Setting menu. 2 Press CH5/6to select bass or treble item. 3 Press VOL+/bass or treble. S.M to SRS MTS bass treble balance on off mono stereo SAP 0 0 0 adjust the You can press the Bass+/- buttons on the remote control to adjust the bass directly;and you can also press theTreb+/- buttons on the remote control to adjust the treble directly. Adjusting the sound balance 1 Access the Audio Setting menu.
Operations (continued) Channel Setting Selecting antenna/cable 1 Access Channel Setting menu. 2 Press CH5/6to select antenna/cable item. 3 Press VOL+/- button to select channel number 9 antenna/cable antenna cable add/erase add erase 48 fine tune channel search antenna or cable. S.M Please select antenna or cable before you start Auto Search. If the TV is connected to antenna, please select antenna. If the TV is connected to cable, please select cable.
Operations (continued) Channel Setting Adding/Erasing Channels After the Channel SEARCH, you can Add/Erase channels that you watch when you press the CH5/6 to change channels. 1 2 S.M Select the channel number which you want to erase using the keypad. Access the Channel Setting menu. 3 Press CH5/6to select add/erase item. 4 Press VOL+/- to select erase. When you press CH5/6 to change channels, this channel will be skipped.
Operations (continued) Selecting channel Using Keypad buttons 1 To select one-digit channel numbers: Input the channel using the 0-9 number button, then press Channel Enter button to confirm. 2 To select two-digit channel numbers: Input the channel using the 0-9 number button, then press Channel Enter button to confirm. S.M 3 To select three-digit channel numbers: Note: The period between presses should be within 2 seconds.
Operations (continued) OSD Setting Setting the language of the menu 1 Access the OSD Setting menu. 2 Press CH5/6 to select the language item. Press VOL+/- to select an OSD language. English, Spanish and French can be selected. 3 S.M language English OSD position OSD background opaque translucent OSD timeout 30 seconds language English Setting the position of the menu 1 Access the OSD Setting menu. 2 Press CH5/6to select the OSD position item.
Operations (continued) Timer setting Using Sleep button Press SLP button to display sleep 耋晤憮 timer menu. Press CH5/6 or VOL+/- repeatedly to set sleep time between:0, 10, 20, 30, 60, 90, 120, 180, 240 minutes. If you select 0 minute, the sleep timer function is turned off. Press the SLP button again to exit the menu. S.
Operations in VGA /YPbPr mode Select VGA/YPbPr mode 1 2 Press the SOURCE button on the unit or button on the remote control. The screen displays the menu shown as right. Press CH5/6 to highlight the VGA or YPbPr/YCbCr item. Press VOL+/- or wait about 4 seconds and the signal source is selected. SOURCE TV AV SVIDEO YPbPr/YCbCr VGA VGA S.M PC signal format Connect VGA input and be sure that there is VGA input signal. The signal format should be set to: 1280 x 768 @ 60Hz.
Operations in VGA /YPbPr mode(continued) Picture Settings Adjusting Brightness/Contrast 1 Access the PICTURE menu. 2 Press CH5/6to select brightness or contrast item. 3 brightness 50 contrast 50 color temp 5000K 7300K 9300K user Press VOL+/- to adjust the customer temp setting selected item. Item S.M Function Notes brightness Adjust the brightness of the picture. Adjusting the picture under VGA mode contrast Adjust the contrast of the picture.
Troubleshooting Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms Ghost or double images No power Check item ! This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. ! ! Check that the AC power cord is plugged into the mains socket. Unplug the power cord, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the unit again.
Specifications Power supply for AC adapter: ~ 110-220 V, 50/60Hz Power Consumption: 60W (Max.) Resolution: 1280 x 768 Pixel Pitch: 0.2895mm x 0.2895 mm Brightness: 450 nit Contrast: 400:1 Viewing angle: 140o (H)/110o (V) Dimensions(panel): 553(W) x 62(D) x 297(H) (mm) Weight： 6.
PRINTED IN RECYCLED PAPER 604-L20H33-02 604-L17H23-00
