OWNER'S MANUAL ACD-75 AM/FM/MPX RADIO WITH DETACHABLE FRONT PANEL, COMPACT DISC PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK
INSTALLATION INSTRUCTIONS ALL AT ION INSTRUC T IONS INSTALL ALLA INSTRUCT INST 1 2 INSTALLATION INSTRUCTIONS This unit is designed for installation in GM and Chrysler cars, trucks, and vans with a 1-1/2 DIN radio opening. In some cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialty shops. Always check the kit application before purchasing to make sure the kit works with your vehicle.
USING A WIRING ADAPTER The easiest wiring method to connect the ACD-75 to the vehicle is to buy a wire harness adapter from your dealer, a car stereo installation shop or an electronics store. If you use a wiring adapter, all wires can be connected to your ACD-75 even before your old radio is removed from the car. Connecting the Wires Splice, crimp or solder the wires from the Audiovox ACD-75 radio connector to the wiring adapter.
INSTALLATION INSTRUCTIONS 4 Install Wiring Inside the Car (See Figures 1 and 2.) a. Connect wiring adapter to the car’s existing wiring harness. b. Connect an antenna extender cable (not supplied) to car antenna lead, if needed. TYPICAL GM APPLICATION (See Figure 1.) Radio Preparation: NOTE: For GM car installations, use the GM Hardware Kit, Part Number 150-1331, which is furnished with the radio. 1.
ITEM # 1 ITEM # 6 SPE A K ER WIRING INSTALLATION INSTRUCTIONS SPEA WIRING DIAGRAM-TYPICAL INSTALLATION FOR GM (Figure 1) 5
INSTALLATION INSTRUCTIONS R A DIO WIRING TYPICAL CHRYSLER APPLICATION (See Figure 2.) 6 Radio Preparation: NOTE: For Chrysler car installations, use the Chrysler Hardware Kit, Part Number 150-1332 1. Select two of the three mounting tabs provided (Items # 7, # 8 and # 9) and match the radio mounting style of the vehicle as shown in Figures 3, 4 and 5. NOTE: The tab number is stamped on the bottom of the tab. 2. Attach the mounting tabs to the radio chassis with the four 1/4” hex head screws provided. 3.
ITEM #’S 7, 8, and 9 (2 PLACES) OR 10mm HEX-HEAD SCREWS (ITEM # 10) INSTALLATION INSTRUCTIONS TYPICAL INSTALLATION FOR CHRYSLER (Figure 2) 7
INSTALLATION INSTRUCTIONS COMPACT DISC PLAYER ACD-75 EJECT TAB #2 POWER LOUD BAND 100 WATT COMPACT DIGITAL AUDIO MODE T/F MUTE VOL EQ MONO TUNE/SKIP 1 LOC TOP 2 SCN 3 RPT 4 RND 5 CD- 6 CD+ VOL Figure 3 TAB #1 COMPACT DISC PLAYER ACD-75 EJECT TAB #2 POWER LOUD BAND 100 WATT COMPACT DIGITAL AUDIO MODE T/F MUTE TAB #2 VOL EQ MONO TUNE/SKIP 1 LOC TOP 2 SCN 3 RPT 4 RND 5 CD- 6 CD+ VOL Figure 4 TAB #3 COMPACT DISC PLAYER ACD-75 POWER LOUD BAND 10
OPERATING INSTRUCTIONS 1 POWER ON-OFF BUTTON Press this button to turn the unit on or off. The unit will also turn on automatically when a compact disc is inserted if the ignition switch is “on”. 2 H VOLUME (LEVEL) CONTROL To increase the volume level, press the VOL button. The volume will increase and the level will be shown on the display panel from a minimum of VOL 00 to a maximum of VOL 39. To decrease the volume level, press the VOL button.
OPERATING INSTRUCTIONS 2 5 seconds of choosing the Treble mode, press the VOL button to decrease the treble response or the VOL button to increase it as desired. The level will be shown on the display panel from a minimum TRE -12 to a maximum of TRE +12 (TRE 00 indicates flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
bn pressed during the scan, the unit will return to the original station before the scan. When the button is pressed and held for longer than 2 seconds, the unit will beep and activate the Auto-Store Tuning feature. The radio will automatically scan and enter up to 6 stations into the pre-set memories on the band in use. If you have already set the pre-set memories to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new ones.
OPERATING INSTRUCTIONS bs FUNCTION DISPLAY (LEVEL METER) The Function Display consits of five bar graphs which provide a visual representation of the volume level and the channel signal levels. The volume level is represented by three thin bar graphs. As the volume is increased, the number of illuminated segments will increase. The channel signal levels are represented by the wider bar graphs.
cq co cn cq ct TIME/FREQUENCY SELECTOR (T/F) During radio operation, press this button to call the time display on the incorporated quartz clock. The display will return to the radio frequency or disc play elapsed time indication after 5 seconds if the time is not being re-set. cu EQUALIZER BUTTON (EQ) The EQ button applies preset sound effects to the unit’s audio output signal. The EQ button,when pressed, will activate one of four operating modes (no equalization, ROCK, CLAS, or POP).
OPERATING INSTRAUCTIONS / SETTING THE CLOCK dn FRONT PANEL RELEASE BUTTON ) (RELEASE This button is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the panel releases on the right side. Then carefully swing the right side out until the left edge disengages. To re-attach the panel, engage the left side first and then gently press in the right side until the it clicks into place. NOTES ON USE OF FRONT PANEL 1.
dm *SPECIFICATIONS Size: Operating Voltage: Fuse Ratings: Output Power: Output Wiring: Output Impedance: Low-Level Output: 7.875" W x 3.125" H x 6.5" D 200.025 mm x 79.375 mm x 165.1 mm 12 volts DC, negative ground Constant (Yellow wire): 15 AMP. Switched (Red wire): 0.5 AMP. 160 watts maximum (40 watts x 4 channels) Floating-ground type designed for 4 speaker use. Front and rear channels CANNOT be combined (bridged) for use with 2 speakers. RCA low-level outputs (rear channels).
CD CHANGER CONTROLS CD CH A NGER CONTR OL S CHA CONTROL OLS Built into this radio are controls to operate an optional CD changer. Please check with your Rampage/Audiovox car stereo specialist or call 1-800-645-4994 for recommendations of the models that will work with this radio. Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play.
played in a random, shuffled order. The Track Select button will also select tracks in the shuffled order instead of the normal progression. The Random Track mode can be canceled by pressing the RND button twice or by activating or Repeat Play functions. the Scan When the RND button is pressed twice, the DISC and RND indications will appear on the display panel and the discs in the magazine will by played in a random, shuffled order, as well as the tracks on each disc.
CD CH A NGER CONTR OL S CHA CONTROL OLS CARE AND MAINTENANCE CARE AND MAINTENANCE The radio section of your new sound system does not require any maintenance. We recommend that you keep this manual for reference on the many features found in this unit as well as how to set the clock. The compact disc player section also requires no routine maintenance, but proper understanding of its use and handling will help you obtain maximum enjoyment of its capabilities.
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD.
© 2000 Audiovox Electronics Corp.
