Manualshelf

User's Manual

ManualsBrandsAUDIOVISION ELECTRONICA AUDIOELEC ManualsCell PhonesGSM Mobile Phone
12345678910
5
non-original batteries, charger and/or accessories.
New batteries or batteries stored for a long time may take more time to charge
When charging your battery, keep it near room temperature.
When storing your battery, keep it uncharged in a cool, dark, dry place.
Battery installation
1，Slide the battery door up and then remove the door.
2，Aim the metal terminals of the battery at those in the battery compartment and then push
down and into it.
Battery charging:
New batteries are not fully charged. Open the protective cover on your phone’s accessory
connector port, then insert the battery charger plug into the accessory connector port on the
side of your phone as shown, and plug the other end into an electrical outlet. Your phone might
require several hours to charge fully. When your phone is power off, it might take a few
seconds to show charging display and it shows charge complete when finished. When your
phone is power on, the battery icon flickers when it starting charging and become still with full
bars in battery icon when finished.
3.3 Memory Card
You can use removable memory card with your phone to store information.
3.4 Turn it on/off
Caution: On power up, the phone may prompt you to enter your SIM card PIN code to unlock
the SIM card. If your phone shows Input PUK code that express your SIM card is locked,
please contact your web service provider.
To turn on your phone, press and hold the power on/off key for two seconds. If prompted, enter
your four-to-eight-digit SIM card PIN code and/or four-digit unlock code.
If you don’t insert a SIM card, your phone shows Insert SIM. None of the functions related to
SIM card can be used and you can make an emergency call only.
To turn off your phone, press and hold the power on/off key for two seconds.
3.5 Make a call
1. Under the sleep mode, input the telephone number directly.
2. Steps will be different according to the options of call settings and set-ups of dual SIM:
Dual SIM open: Then press send key, you can choose menu -- SIM 1/SIM 2 to dial calls.
Only SIM 1 open/ only SIM2 open: If set only SIM1 or only SIM2, you can press send key to
dial calls.
3. After calling, press the power on/off key or end key to end.