User's Manual
Number
9
key
WXYZwxyz9
Number
0
key
blank
* Change
to
symbol
input
# Change
to
input
method
Move
to
left up
down
Move
to
right
Left
soft key
Confirm
Right
soft key
Delete
Hung
up
key
Change
to
standby
menu
English
entered
the general
method
of
operation:
*keys
are
used
to
enter
more
characters.νEach Rapid
repeat
button
until
the
character
you
need
there.
Such
as
moving
the
cursor, then
enter
the
next
character.
*by
the # key
to
switch
inputν
methods.
*When
you
need
a
space bar
at
the uppercase
letters
or
lowercaseν
letters, press 0
key
once.
Input
with
the
right
softkey
to
clear
the
error.
6.3 The
use of
USB
storage
function
Note
the
use of
pre
-
″
keep
the
right
to
connect
USB
devices
and
USB devices
to
stop
operation.
″
Do
not
use
windows
to
format
the
order
of
this
format
a
removable
disk
drive
operations,
otherwise
they
will
not
repair
the
damage
caused.
USB″
operating
environment:
windows2000 /
XP.ν
For
other
operatingν
systems,
may
need
to
install
USB
drivers
can
be
successfully
established
with
the
PC-phone
connection.
Support
network
of
the
mobile
phone
camera
function
turned
on,
insert
the
USB
link
to
computer,
cell
phone
tips
storage″
device:
Select
this,
the
phone
automatically
shuts
down
the
operation
of
mobile
phones
and
computers
and
data
transmission;
network
camera:
choose
the″
later,
cell
phone
cameras
into
the
network
of
state,
namely:
in
the
QQ
chat
function
in
the
camera;
sequence
interface:
state-of-charge
to
return
to″ boot.
’
Warning
Specific Absorption Rate (SAR) information
This wireless phone meets the government s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons regardless of age or health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR, The SAR limit set by the FCC is 1.6 W/Kg.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2)
this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with