User's Manual

Note: when on the local telephone call, whether or not to activate IP dial-up, please contact the
network operator.
4. Basic Operations
4.1 open
put down [on / off] key, you can open the phone. If the SIM card and cell phone are not set up
password-protected, mobile phone display screen will show the open screen, and then
automatically search the web. When the mobile phone registered to the network, the network
operator's name will be displayed on the screen. At this point you will be able to set aside or to
answer the call of the.
If, after the open screen shows "Please insert SIM card", please shut down, the check your SIM
card is correctly installed or not installed.
Insert the SIM card, so the opportunity to automatically test the SIM card is available, and then the
screen will prompt the following sequence:
1) "Enter the phone lock code" - if you open the phone lock.
2) "enter PIN" - If you open the SIM lock.
3) "no service" - said the registration of the network fails, the phone will not be able to implement
network services.
4) "can call the emergency phone" - said the registration to other networks, only allows 112 calls.
5) "search" - the phone is still searching for the network, until find the appropriate service network.
6) "China Mobile or China Unicom," - said the success of the network registration.
Note: If you do not know PIN code, contact your network vendor.
Phone default password is "1122."
4.2 Shutdown
If you want to turn off the phone, press and hold the phone the top key, when the animation off the
screen, the phone closed. Please do not remove the battery by directly shutting down the way, if to
do so, easily damaged SIM cards and led to the loss of some information.
4.3 standby shortcut
Interface in standby, if you want to start the numerical simulation, such as keyboard operation call,
use touch pen interface in the standby screen, click the main dial-up icon on the bottom of the
middle
4.4 call
dial interface onυ the screen enter a phone number (if entered incorrect characters, please click
the Clear key touch pen to delete), press the call key to dial-up. To hang up or cancel the dial-up
please click [Cancel] key or press [ON / OFF
υ machine] key; when the phone connected, the screen can see the call time display.
The use of the telephone call: to enter is stored in the phoneυ book to find the name / phone
number, the call by dialing keys.
call aυ recently dialed phone number: In standby mode, click the Call key to view your recently