User's Manual

This device has been tested and found to comply with Part 15 of the FCC

rules. Performance is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

3. Changes or modifications not expressly approved by the

manufacturer or authorized service center could void the user’s

authority to operate this equipment.

Appendix E: The Usage of Card-Reader

A memory card reader is a device used for communication with a smart

card or a flash memory card.

1. Remove the cover of the card-reader by sliding it and put the loge

“spice” face up.

2. Insert the T-Flash card, with the notch at the upper and the logo

“spice” face up, into the card-reader slot.

3. Insert the card-reader into the USB interface of the computer or other

equipments which can identify it.

Warning: Please make sure the logo “spice” face of the card-reader and

the memory card at the same side, or you may spoil your card-reader.