User's Manual

33
.
Battery Information
Charing and Discharging
The charger is designed to be used in temperatures between0°C to
40°C.
Do not charge the phone in wet and damp conditions.
Use only batteries approved by the phone manufacturer and
recharge your battery only with the charges approved by the
manufacturer.
We strive to produce products in compliance with global
environmental standards
The charger meets the standard for safety of information technology
equipment and office equipment use. It must be used for this purpose
only.
Your phone is powered by a rechargeable battery. Full performance
of the battery is achieved only after two or three complete charge and
discharge cycles.
When the battery level is low, “Low Battery” will be displayed on the
LCD screen. If you have selected Alert Tone (Warning Tone of any
profile in Profiles), the phone will sound the alert tone.
When a charger is not in use, disconnect it from the power source.
Do not leave the battery connected to a charger for longer than 12
hours, since overcharging may shorten its life.
Temperature extremes will affect the ability of your battery to charge.
Technical specifications:
Adapter
Input: AC 100-240 V / 50-60 Hz / 0.15 A
Output: DC 5 V / 500 mA
Caution: the network voltage is classified as a
hazard by the criteria of this standard.