User's Manual

27
User Profiles
General
1. Activate
2. Customize
 Tone Setup: Includes Incoming Call, Power On, Power Off, Cover
Open, Cover Close, Message Tone, and Keypad Tone. You can
select built-in ring tunes, or the tunes composed by yourself.
 Volume: Includes the volume setting of Ring Tone and Key Tone.
The volume degree is from 1 to 7.
 Alert Type:
− Ring: Just ringing, no vibration.
− Vibration Only: Just Vibrating, no ringing.
− Vibra and Ring: Vibrating and ringing.
− Vibra Then Ring: Ringing after vibration.
 Ring Type:
− Single: Rings once when a call is coming.
− Repeat: Rings continuously when a call is coming.
− Ascending: Rings continuously and the volume increases
gradually.
Tip: Human singing tone cannot be played in Ascending Ring.
 Extra Tone:
− Warning: If necessary, you will be warned by the prompt tone.
− Error: You will be warned by a tone if you make a mistake.
− Camp On: A prompt tone will be heard after searching the
network successfully.
− Connect: A prompt tone will be heard after getting through to the
dialed number.
 Answer Mode:
− Any Key: Press any key to answer a call (Except of Hang Up
Key and Right Soft Key)