User's Manual

7
3. Replace the battery and close the cover tightly.
Note: The T-flash card can not be used alone. You should insert the SIM
card first, and then the T-flash card can be used.
Charging The Battery
Note: Please always keep your phone connector and charger dry.
1. Connect the connector of the travel adapter to the phone.
2. Plug the travel adapter into a proper AC wall outlet.
3. When your phone indicates that the battery is fully charged, please
pull the ravel adapter out from the I/O socket of the phone.
Tip: 1. If the battery is totally empty or not enough, it may take a few
minutes before the charging indicator appears on the screen.
2. You can turn on/off, and use the phone while charging.
Warning: Make sure that the standard voltage/power of the place where
you charge the battery matches with the rated voltage/power of our travel
adapter.
Switching Your Phone On/Off
 Press and hold Power Key for a few seconds to switch your phone
on.
 If the phone ask for a phone lock code:
Enter the phone lock code, and press OK.
 If the phone ask for a PIN code:
Enter the PIN code, and press OK. The PIN code is usually supplied
with the SIM card. Please consult your network operator for more
information.
 Access the standby mode.
Press and hold Power Key for a few seconds to switch your phone
off.
Using The Personal Handsfree Handset