Specifications

ee--mmaaiill::
[e-mail]
vvooiiccee::
360.854.9559
ffaaxx::
360.854.9479
8
SS 4.2 Installation and Operation Manual
INSTALLATION
INSTALLATION GUIDELINES
Inspection:
Please examine your SS 4.2 carefully for any damage that may have been sustained
during shipping. If any is noted, please notify the shipper immediately and retain
the packaging for inspection by the shipper. The package contains the SS 4.2, 16.5
vac @ 600ma power transformer, Installation manual and a reversed modular serial
cable with a (S9) 9 pin D-Sub adapter.
Setting Operation “DIP” Switches:
The SS 4.2 is equipped with an 8-position “PGM” dipswitch. The dipswitch speci-
fies 2-bit unit ID, baud, audio modes (mix, interlock, overlap), and other features
listed below. Access to this switch is on the rear panel. Follow the description
below.
WEBSITE:
Visit our web site for
product updates and
additional information
DIP (SW-13) “PGM” Switch Functions
Switch
Number
Default
Setting
Function
1 OFF Add 1 to Address (Default ID = 0)
2 OFF Add 2 to Address
3 OFF Baud rate (Default = 9600)
4 OFF Baud rate
5 OFF Stereo Audio Switching (Default = Overlap)
6 OFF Stereo Audio Switching
7 OFF Remote Control (Default) / PIP/GPI
8 OFF Power up modes (Default = Last Source Selected)
Address (ID) DIP Switches
SW13-1 SW13-2 Mode
OFF OFF ID = 0
ON OFF ID = 1
OFF ON ID = 2
ON ON ID = 3
Baud Rate DIP Switches
SW13-3 SW13-4 Mode
OFF OFF 9600
ON OFF 2400
OFF ON 19200
ON ON 38400
Audio Switch Mode DIP Switches
SW13-5 SW13-6 Mode
OFF OFF Overlap
ON OFF Interlock
OFF ON Interlock
ON ON Mix