Specifications

ee--mmaaiill::
[e-mail]
vvooiiccee::
360.854.9559
ffaaxx::
360.854.9479
11
SS 4.2 Installation and Operation Manual
INSTALLATION
Connecting the RS-232 Serial Port:
Use the provided modular (S9) 9-pin D-sub connector adapter and reversed modu-
lar cord to connect the SS 4.2’s serial connector to your serial port.
WEBSITE:
Visit our web site for
product updates and
additional information
Front Panel LED’s:
Front Panel LED’s Number
Of LED’s
Activation Event/Mode
Activation
Behavior
Input connected to
“OP 1”
4 Green State of Connection On if connected
Input connected to
“OP 2”
4 Red State of Connection On if connected
“Mute” 1 Red System Mute Status On
“Pgm” 1 Red Future applications Off
“ACT-1” Audio activity
for output 1
1 Green Valid Audio “OP 1” On if audio for output
1 is above threshold
“ACT-2” Audio activity
for output 2
1 Green Valid Audio “OP 2” On if audio for output
2 is above threshold
“SS-1”, Silence Alarm
for output 1
1 Red Duration of Silence On if alarmed
“SS-1”, Silence Alarm
for output 2
1 Red Duration of Silence On is alarmed
“PIP” Pulse Active 1 Yellow Any valid GPI input,
when enabled.
On
“Pwr/Ser” Status 1 Green Valid Power and/or
serial data.
On
Front Panel Switches:
Switch(es) Function
1-4 for each output Input Channel 1-4
MUTE Mute either or both Outputs
ENABLE
Use as a safety switch. May be enabled by
removing JP3.
Hidden “PGM” switch Used to program the power up configuration
RJ-11
Adapter
Pin
DB-9
D-Sub
SS 8.2
(Point of view)
4 3 RS-232 Receive
3 2 RS-232 Transmit
2 5 Ground
Modular Jack
Pin Numbers