Operating instructions

18
OTHER IMPORTANT INFORMATION
Connecting the headphones.
Connect the headphones with a 3.5 mm [1/8 inch]
stereo plug to the PHONES output on the front panel.
When the headphones are connected, the speaker
output turns off automatically. When the headphones
are connected, there is no audio output from the speak-
ers. Adjust the volume with the volume knob. Listen-
ing through the headphones at high volumes can be
dangerous to one’s hearing.
NOTE! Before disconnecting headphones, turn the vol-
ume knob to minimum (VOL OO).
Connecting an audio source to LINE IN on the front
panel.
Connect an external sound source (such as an Mp3
player) to LINE IN on the front panel. Use a cable with a
3.5 mm [1/8 inch] stereo plug. Select LINE as an audio
source using the SOURCE button on the front panel or
the INPUT button on the remote control.
Connecting an audio source to AUX on back panel.
Connect an external audio source (such as a CD player)
to AUX on the back panel. Use a cable with PHONO
plugs. Select AUX as the audio source using the
SOURCE button on the front panel or the INPUT button
on the remote control.
ACE BASS selector switch on back panel.
This selector switch must always be in the ON position
when the Stereo One ACE PLUS speakers a connected.
The selector switch is locked in the ON position at the
factory.
However, the selector switch can be placed in the OFF
position if other speakers are to be connected to the
unit. Unscrew the locking mechanism and move the
switch to the OFF position. Screw the locking mecha-
nism back on.